Dixon Clamps
Dixon Strap-Grip Saddles and Male Stems
Vendor: Dixon Clamps
Coupling Type: Clamps
Description:
Plated Iron - Stainless Steel - Plated Carbon Steel
Coupling Category:
Clamps
Strap-Grip saddles are designed to provide greater resistance
to end pull than conventional band clamps alone. The male
fittings shown below are designed for use with Strap-Grip
saddles. Cam and Groove fittings are available on page 60.
Saddles are designed for use with 3/4" or 5/8" wide bands. A
band clamp should first be applied to OD to seal the hose in
sizes 3" and over. Then Strap-Grip saddles should be banded
on top of initial clamps to anchor the fitting in the hose.
saddles
| Size | Hose OD | Plated Iron Part # |
|
| from | to | ||
| 1-1/2" | 1-13/16" | 2-1/8" | SGS150 |
| 2" | 2-5/8" | 3" | SGS200 |
| 3" | 3-1/2" | 3-7/8" | SGS300 |
| 4" | 4-9/16" | 5-1/8" | SGS400 |
| 6" | 6-1/2" | 7-1/16" | SGS600 |
| 8" | 8-5/8" | 9-3/8" | SGS800 1 |
1 product will be discontinued as inventory is depleted
male stems
schedule 40
| Size | Plated Carbon Steel Part # |
Stainless Steel Part # |
| 1-1/2" | LP21 | --- |
| 2" | LP26 | --- |
| 3" | LP36 | RLP36 1 |
| 4" | LP46 | RLP46 1 |
| 6" | LP66 | --- |
schedule 80 2
| Size | Plated Carbon Steel Part # |
| 1-1/2" | LP21-80 |
| 2" | LP26-80 |
1 made from tubular steel
2 schedule 80 stems meet NFPA 58
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |