Dixon Strap-Grip Saddles and Male Stems

Description:

Plated Iron - Stainless Steel - Plated Carbon Steel

Coupling Category

Clamps

Manufacturer

Dixon Clamps

Strap-Grip saddles are designed to provide greater resistance to end pull than conventional band clamps alone. The male fittings shown below are designed for use with Strap-Grip saddles. Cam and Groove fittings are available on page 60. Saddles are designed for use with 3/4" or 5/8" wide bands. A band clamp should first be applied to OD to seal the hose in sizes 3" and over. Then Strap-Grip saddles should be banded on top of initial clamps to anchor the fitting in the hose.

saddles

Size Hose OD Plated Iron
Part #
from to
1-1/2" 1-13/16" 2-1/8" SGS150
2" 2-5/8" 3" SGS200
3" 3-1/2" 3-7/8" SGS300
4" 4-9/16" 5-1/8" SGS400
6" 6-1/2" 7-1/16" SGS600
8" 8-5/8" 9-3/8" SGS800 1
1  product will be discontinued as inventory is depleted


male stems


schedule 40

Size Plated Carbon Steel
Part #
Stainless Steel
Part #
1-1/2" LP21 ---
2" LP26 ---
3" LP36 RLP36 1
4" LP46 RLP46 1
6" LP66 ---


schedule 80 2

Size Plated Carbon Steel Part #
1-1/2" LP21-80
2" LP26-80
1  made from tubular steel
2  schedule 80 stems meet NFPA 58
Dixon Strap-Grip Saddles and Male Stems
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov