General Pump
Triplex Plunger Pump with Built-in Unloader and Downstream Injector

Vendor: General Pump

Coupling Type: Pressure Washer Couplings, Equipment & Accessories

Description:

TP Series 51 Hollow Shaft

Coupling Category:

Pressure Cleaning Pumps

TP Series 51, Triplex Plunger Pump with Built-in Unloader and Downstream Injector, Hollow Shaft, Flanged for Direct Couple to Gasoline Engines.

Features

• Forged brass manifold with exclusive lifetimewarranty
• New, over-sized connecting rods for ultimate crankcase performance
• Die cast, anodized aluminum, oil-bath crankcase
• Solid ceramic plungers with continuously lubricated packings
• The original Interpump unitized, stainless steel, K123 inlet and outlet valves
• Ideal for all general cleaning applications
• Comes standard with either SAE J609 gasoline engine mounting flange, or NEMA 56C mounting flange.*
• Also available in “L” left-handed versions
  

Specifications
Pump Model	TP2520J34UIL	TP2526J34UIL	TP2530J34UIL	TP2533J34UIL
Maximum Volume	1.9 GPM	2.6 GPM	2.88 GPM	3.3 GPM
Maximum Discharge Pressure	2500 PSI
Rated Pump Speed	3400 RPM
Maximum Inlet Pressure	125 PSI
Maximum Inlet Vacuum	3 ft. water (2.6 in. Hg)
Bore	.591 in. / 15 mm
Stroke (in. / mm)	.197 / 5	.260 / 6.6	.283 / 7.2	.315 / 8
Crankcase Oil Capacity	11.0 oz.
Maximum Fluid Temperature	165°F
Pump Inlet Port Thread	3/8-19 BSPP-F
Unloader Inlet Port Thread	1/2-14 BSPP-F**
Pump Discharge Port Thread	1/4-19 BSPP-F
Unloader Discharge Port Thread	3/8-19 BSPP-M
Hollow Shaft I.D.	3/4 in. / 19 mm
Weight	11.4 lbs.
Dimensions	7.0 x 7.2 x 5.5 in.

**DO NOT use NPT Inlet Fitting; GP 680006 Inlet Fitting is recommended.

	GPM PSI	RPM	BORE	STROKE	HP	SHP WGHT
TP2520J34UIL	1.9 GPM 2500 PSI	3400 RPM	.591 in./15 mm	.197 in./5.0 mm	4.9 GHP	11.4 lbs.
TP2526J34UIL	2.6 GPM 2700 PSI	3400 RPM	.591 in./15 mm	.256 in./6.5 mm	7.2 GHP	11.4 lbs.
TP2530J34UIL	2.88 GPM 2700 PSI	3400 RPM	.591 in./15 mm	.283 in./7.2 mm	8.0 GHP	11.4 lbs.
TP2533J34UIL	3.3 GPM 2500 PSI	3400 RPM	.591 in./15 mm	.315 in./8.0 mm	8.5 GHP	11.4 lbs.