Dixon Shank / Water Fittings
Dixon Steel King Hose Menders
Vendor: Dixon Shank / Water Fittings
Coupling Type: Industrial / Specialty Couplings & Accessories
Description:
1 clamp each end - 2 clamp each end
Coupling Category:
Shank / Water Fittings
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application. Consult the JGB for recommendations.
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement. For additional information and detailed instruction on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.
-
They are not for compressible products such as air, nitrogen or steam.
| Size | for 1 clamp each end | for 2 clamp each end |
| Steel | Steel | |
| Part # | Part # | |
| 1/4" | KM21 | ... |
| 5/16" | KM251 | ... |
| 1/2" | KM 41 | KM42 |
| 5/8" | KM51 | KM52 |
| 3/4" | KM61 | KM62 |
| 1" | KM81 | KM82 |
| 1-1/4" | KM101 | KM102 |
| 1-1/2" | KM121 | KM122 |
| 2" | ... | KM162 |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |