Dixon Shank / Water Fittings
Steel Dixon Hose Menders
Vendor: Dixon Shank / Water Fittings
Coupling Type: Industrial / Specialty Couplings & Accessories
Description:
Zinc Plated Steel - 316 Stainless Steel
Coupling Category:
Shank / Water Fittings
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application. Consult the JGB for recommendations.
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement. For additional information and detailed instruction on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.
-
They are not for compressible products such as air, nitrogen or steam.
| Size | Zinc Plated Steel | Opt Qty | 316 Stainless Steel | Opt Qty |
| Part # | Part # | |||
| 1/4" | DMA | 200 | RDMA | 100 |
| 3/8" | DMB | 100 | RDMB | 100 |
| 1/2" | DM1 | 50 | RDM1 | 50 |
| 5/8" | DM5 | 50 | --- | --- |
| 3/4" | DM6 | 50 | RDM6 | 50 |
| 1" | DM11 | 50 | RDM11 | 50 |
| 1-1/4" | DM16 | 50 | RDM16 | 5 |
| 1-3/8" | DM18 | 50 | --- | --- |
| 1-1/2" | DM21 | 50 | RDM21 | 50 |
| 1-1/2" | DMXL21 1 | 25 | --- | --- |
| 2" | DM26 | 50 | RDM26 | 10 |
| 2" | DMXL26 1 | 25 | --- | --- |
| 2-1/2" | DM31 | 25 | --- | --- |
| 3" | DM36 | 20 | RDM36 | 5 |
| 4" | DM46 | 10 | RDM46 | 5 |
| 5" | DM51 | 5 | --- | --- |
| 6" | DM66 | 4 | --- | --- |
| 8" | DM86 | 1 | --- | --- |
| 10" | DM100 | 1 | --- | --- |
| 12" | DM120 | 1 | --- | --- |
1 XL series is extra long
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |