Dixon Cam and Groove Fittings
Dixon Polypropylene Couplers, Types B, C, D, H

Polypropylene Couplers and Elbows

Cam and Groove

NOT recommended for use with PTFE gaskets

Recommended for a maximum working pressure of 125 PSI (1/2" - 1"), 100 PSI (1-1/4" - 2") and 75 PSI (3" - 4"); recommendations based on the use of mating Dixon fittings at an ambient temperature of 70°F with standard seal installed.
1/2" couplers and adapters will interchange with 3/4" couplers and adapters. Only the threads and barbs are 1/2". 1-1/4" couplers and adapters will interchange with 1-1/2" couplers and adapters. Only the threads and barbs are 1-1/4".
Polypropylene cam and groove should not be mixed with metal fittings.
supplied with EPDM gaskets, 304 stainless steel handles and pins
Couplers are manufactured from a glass-filled polypropylene.

¹ Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.

² 4" coupler has 3 handles

• locking handle is only available in 1-1/4" thru 2"

Recommended for a maximum working pressure of 100 PSI (1-1/2" - 2"); recommendations based on the use of mating Dixon fittings at an ambient temperature of 70°F with standard seal installed.
Coupler elbows are manufactured from a glass-filled polypropylene.
Supplied with EPDM gaskets, 304 stainless steel handles and pins.
For use at elevated temperatures or other unusual operating conditions, consult JGB.