Dixon Polypropylene Couplers, Types B, C, D, H

Description:

Polypropylene Couplers and Elbows

Coupling Category

Cam and Groove

Manufacturer

Dixon Cam and Groove Fittings

Polypropylene Couplers

NOT recommended for use with PTFE gaskets

• Recommended for a maximum working pressure of 125 PSI (1/2" - 1"), 100 PSI (1-1/4" - 2") and 75 PSI (3" - 4"); recommendations based on the use of mating Dixon fittings at an ambient temperature of 70°F with standard seal installed.
• 1/2" couplers and adapters will interchange with 3/4" couplers and adapters. Only the threads and barbs are 1/2". 1-1/4" couplers and adapters will interchange with 1-1/2" couplers and adapters. Only the threads and barbs are 1-1/4".
• Polypropylene cam and groove should not be mixed with metal fittings.
• supplied with EPDM gaskets, 304 stainless steel handles and pins
• Couplers are manufactured from a glass-filled polypropylene.

1  Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.  2  4" coupler has 3 handles • locking handle is only available in 1-1/4" thru 2"

• Recommended for a maximum working pressure of 100 PSI (1-1/2" - 2"); recommendations based on the use of mating Dixon fittings at an ambient temperature of 70°F with standard seal installed.
• Coupler elbows are manufactured from a glass-filled polypropylene.
• Supplied with EPDM gaskets, 304 stainless steel handles and pins.
• For use at elevated temperatures or other unusual operating conditions, consult JGB.