Manuli Rubber Industries
Rockmaster / 2SC

Types:
Hydraulic Hose

Vendor: Manuli Rubber Industries

Application:

ABRASION, WEATHER & HEAT RESISTANCE

Medium-high pressure lines with installation constraints in heavy duty environmental conditions, specific installations with severe abrasion conditions, marine applications, underground and open pit mining, return and suction lines

KEY PERFORMANCE

• Superior abrasion resistance
  
• High ozone and weather resistance
  
• Flame resistance to a wide range of spec.
• Antistatic and anti-toxic cover
  
• Working pressure improvement
  
• Range extension to DN 76
  
• Vacuum resistance with SAE R4 performance approved on sizes up to DN 76

Tube:

Oil resistant synthetic rubber

Reinforcement:

2 high tensile steel braids (2WB)

Cover:

Synthetic rubber with high ozone, weather and heat resistance.

Temperature:

Continuous Service: -40°F / +212°F or -40°C / +100°C
Max. Operating (Intermittent service): 257°F 125°C

Recommended Fluids:	Mineral oils, vegetable and rape seed oils, glycol and polyglycol based oils, synthetic ester based oils, oils in aqueous emulsion, water
Insert:	MF2000® - MULTIFIT TYPE
Applicable Specs.:	Exceed EN 857 2SC - ISO 11237-1 2SC, SAE 100R 16S; in addition: DN 25 SAE 100 R17, ISO 11237-1 R17
Type Approvals:	GOST-R, LOBA (DN 5÷25), LR, MSHA, RINA (DN 6÷31), (DN 5÷76)

PART. REF.	HOSE SIZE			R.O.D.		O.D.		MAX W.P.		BURST PRESSURE		MIN. BEND RADIUS		WEIGHT		FITTING	Request Quote
	DN	dash	inch	mm	inch	mm	inch	bar	psi	bar	psi	mm	inch	g/m	lb/ft
H01030005	5	-3	3/16	9,7	0,38	11,5	0,45	420	6090	2000	29000	40	1,57	215	0,14	MF+M03400-03	Request Quote
H01030006	6	-4	1/4	11,3	0,44	13,1	0,52	400	5800	1850	26820	45	1,77	265	0,18	MF+M03400-04	Request Quote
H01030008	8	-5	5/16	12,9	0,51	14,7	0,58	350	5070	1700	24650	55	2,17	320	0,21	MF+M03400-05	Request Quote
H01030010	10	-6	3/8	15,0	0,59	16,8	0,66	330	4780	1500	21750	65	2,56	390	0,26	MF+M03400-06	Request Quote
H01030012	12	-8	1/2	18,5	0,73	20,3	0,80	275	3980	1220	17690	80	3,15	490	0,33	MF+M03400-08	Request Quote
H01030016	16	-10	5/8	21,8	0,86	23,6	0,93	250	3620	1050	15220	90	3,54	590	0,40	MF+M03400-10	Request Quote
H01030019	19	-12	3/4	25,6	1,01	27,6	1,09	245	3550	980	14210	120	4,72	795	0,53	MF+M03400-12	Request Quote
H01030025	25	-16	1	33,0	1,30	35,2	1,39	210	3040	840	12180	150	5,91	1160	0,78	MF+M03400-16	Request Quote
H01030031	31	-20	1.1/4	41,1	1,62	43,6	1,72	140	2030	560	8120	250	9,84	1555	1,04	MF+M03400-20	Request Quote
H01030038	38	-24	1.1/2	47,7	1,88	50,7	2,00	100	1450	400	5800	300	11,81	1845	1,24	MF+M03400-24	Request Quote
H01030051	51	-32	2	60,4	2,38	63,4	2,50	90	1300	360	5220	400	15,75	2375	1,59	MF+M03400-32	Request Quote
H01030063	63	-40	2.1/2	73,0	2,87	76,0	2,99	70	1010	300	4350	760	29,92	2955	1,98	MFvM03400-40	Request Quote
H01030076	76	-48	3	87,8	3,46	90,5	3,56	45	650	180	2610	900	35,43	3155	2,11	MF+M03400-48	Request Quote