Aeroquip
2807 PTFE Hose

Application:

SAE 100R14A

Hot air, steam, compressor discharge and most chemical applications. Not recommended for steam-cold water cycling.

Tube:

Extruded PTFE tube

Cover:

Stainless steel single wire braid

Temperature:

–100°F to +500°F (–73°C to +260°C).

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Part Number	Hose I.D.		Hose O.D.		Maximum Operating Pressure		Minimum Burst Pressure		Minimum Bend Radius		Vacuum Service		Weight of Hose		Request a Quote
Part Number	mm	in	mm	in	bar	psi	bar	psi	mm	in	kPa	in/Hg	Kg/m	lbs/ft	Request a Quote
2807-3	3,6	0.14	6,4	0.25	210,0	3000	840,0	12000	38,1	1.50	94,8	28	0,06	0.04	Request Quote
2807-4	4,8	0.19	7,6	0.30	210,0	3000	840,0	12000	50,8	2.00	94,8	28	0,09	0.06	Request Quote
2807-5	6,6	0.26	9,4	0.37	210,0	3000	840,0	12000	76,2	3.00	94,8	28	0,12	0.08	Request Quote
2807-6	8,1	0.32	10,9	0.43	175,0	2500	700,0	10000	101,6	4.00	94,8‡	28‡	0,15	0.10	Request Quote
2807-8	10,7	0.42	13,7	0.54	140,0	2000	560,0	8000	133,4	5.25	94,8‡	28‡	0,18	0.12	Request Quote
2807-10	13,0	0.51	16,0	0.63	105,0	1500	420,0	6000	165,1	6.50	94,8‡	28‡	0,24	0.16	Request Quote
2807-12	16,3	0.64	19,3	0.76	84,0	1200	335,0	4800	196,9	7.75	94,8‡	28‡	0,27	0.18	Request Quote
2807-16	22,4	0.88	26,2	1.03	70,0	1000	280,0	4000	228,6	9.00	40,6‡	12‡	0,39	0.26	Request Quote
2807-20	28,4	1.12	32,8	1.29	43,0	625	175,0	2500	406,4	16.00	40,6‡	12‡	0,51	0.34	Request Quote

‡ Maximum negative pressure for -06 and larger are
suitable for hose which has suffered no external damage or
kinking. If greater negative pressures are required for -06 and
larger hoses, the use of an internal support coil is recommended.
Use of an internal support coil in -06 and larger PTFE hose is
recommended for tube support where extended or continuous
service at high temperature together with low or negative pressure is expected.