Kuriyama
Kuri Tec Series K7000 Anti-Stat Blasting Tubing

Types:
Chemical Hose Sub Type: Chemical Transfer Hose

Vendor: Kuriyama

Application:

A specially formulated anti-static PVC tubing for the loading of ammonium nitrate/fuel oil blasting agents used in the mining and construction industries.

Bulk unloading of ammonium nitrate/fuel oil blasting agents in small diameter holes.
Successfully used for years with Orica’s blast hole chargers, intermediate loaders and the Penberthy Anoloader.
Mining and construction site blasting.

Features

Conductivity – effectively limits build-up of static electricity; provides path for its safe dissipation to ground.
Bleeds off static charges built up during pneumatic loading of Ammonium Nitrate/Fuel Oil mixtures.
Sufficient resistance – guards blasting circuit against stray electrical currents.
Wear resistance – smooth interior and exterior surfaces, combined with tough material formulation, provide good wear resistance.
Self-extinguishing characteristics.
Excellent flexibility – sufficiently flexible to handle easily, yet rigid enough to reach upwards into collars of steeply-inclined holes.
Easily identifiable – co-extruded continuous orange stripe makes tubing visible in underground lighting.
Embossed branding – provides lasting identification.
Packaged for ease of handling and shipping.
Phthalate Free!

Tube:

Specially-formulated anti-static PVC compound.

Temperature:

-30 to 150 ºF
-35 to 65 ºC

Packaging:

Packaged for ease of handling and shipping.

Lengths:

100/200/300 ft.

Category:

Kuri Tec®

Options:

Special ID sizes and lengths are available on request.

Series No.	Size Code	Inside Diameter		Approx. O.D.		Max. W.P.		Approx. Wt.	Approx. Mass	Length/Coil		Request a Quote
Series No.	Size Code	Inches	mm	Inches	mm	PSI	MPa	per 100 ft. (lbs.)	per 100 m (kg.)	ft.	m	Request a Quote
K7000	10	5/8	16	55/64	22	120	0.83	17.5	25	200	61	Request Quote
K7000	12	3/4	19	1 1/16	27	120	0.83	28	40	200	61	Request Quote
K7000	16	1	25	1 21/64	34	120	0.83	38	55	300	91	Request Quote
K7000	20	1 1/4	32	1 5/8	41	120	0.83	55	78	100	30	Request Quote

† NOTE: A new coil of tubing can have its pliancy restored by the application of heat before it is placed in service underground. This will facilitate handling and its attachment to pneumatic loading equipment. Steam or very hot water passed through the coiled tubing will remove the "set" from the new tubing and allow it to be straightened easily. The tubing should then be left to cool in the straight position.