Kuriyama - Kuri Tec Series K7000 Anti-Stat Blasting Tubing
Vendor: Kuriyama
Category: Chemical Hose
Sub Type: Chemical Transfer Hose
Application:
A specially formulated anti-static PVC tubing for the loading of ammonium nitrate/fuel oil blasting agents used in the mining and construction industries.
- Bulk unloading of ammonium nitrate/fuel oil blasting agents in small diameter holes.
- Successfully used for years with Orica’s blast hole chargers, intermediate loaders and the Penberthy Anoloader.
- Mining and construction site blasting.
Features
- Conductivity – effectively limits build-up of static electricity; provides path for its safe dissipation to ground.
- Bleeds off static charges built up during pneumatic loading of Ammonium Nitrate/Fuel Oil mixtures.
- Sufficient resistance – guards blasting circuit against stray electrical currents.
- Wear resistance – smooth interior and exterior surfaces, combined with tough material formulation, provide good wear resistance.
- Self-extinguishing characteristics.
- Excellent flexibility – sufficiently flexible to handle easily, yet rigid enough to reach upwards into collars of steeply-inclined holes.
- Easily identifiable – co-extruded continuous orange stripe makes tubing visible in underground lighting.
- Embossed branding – provides lasting identification.
- Packaged for ease of handling and shipping.
- Phthalate Free!
Tube:
Specially-formulated anti-static PVC compound.
Temperature:
-30 to 150 ºF
-35 to 65 ºC
Packaging:
Packaged for ease of handling and shipping.
Lengths:
100/200/300 ft.
Category:
Kuri Tec®
Options:
Special ID sizes and lengths are available on request.
| Series No. | Size Code | Inside Diameter | Approx. O.D. | Max. W.P. | Approx. Wt. | Approx. Mass | Length/Coil | Request a Quote | ||||
| Inches | mm | Inches | mm | PSI | MPa | per 100 ft. (lbs.) | per 100 m (kg.) | ft. | m | |||
| K7000 | 10 | 5/8 | 16 | 55/64 | 22 | 120 | 0.83 | 17.5 | 25 | 200 | 61 | Request Quote |
| K7000 | 12 | 3/4 | 19 | 1 1/16 | 27 | 120 | 0.83 | 28 | 40 | 200 | 61 | Request Quote |
| K7000 | 16 | 1 | 25 | 1 21/64 | 34 | 120 | 0.83 | 38 | 55 | 300 | 91 | Request Quote |
| K7000 | 20 | 1 1/4 | 32 | 1 5/8 | 41 | 120 | 0.83 | 55 | 78 | 100 | 30 | Request Quote |
† NOTE: A new coil of tubing can have its pliancy restored by the application of heat before it is placed in service underground. This will facilitate handling
and its attachment to pneumatic loading equipment. Steam or very hot water passed through the coiled tubing will remove the "set" from the new tubing
and allow it to be straightened easily. The tubing should then be left to cool in the straight position.
Phthalate Free(15)
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |