Ham-Let Product Lines

 

Pipeline Precision Instrument Pipe Fittings

The Pipeline range of connectors is manufactured for typical applications in chemical and petrochemical processing plants, as well as oil, gas and power generation industries.

Installation instructions

To ensure a leak tight seal, HAM-LET recommends the use of a pipe thread sealant on all NPT threads. The most effective sealing method is PTFE tape. Tape should be used only on male tapered pipe threads.

Do not use tape on flared, coned or tube fitting ends!

Clean both male and female tapered threads. Wrap tape in the direction of the male tapered thread spiral.

Note:Two wraps are suggested for stainless steel tapered pipe threads. Make sure tape does not overhang the first thread as the tape could shred and get into the fluid system. Cut off excess tape. The connection is now ready for proper makeup.

Features

• Size ranges from 1/8" through 1".
• Fittings are properly packaged with the exposed threads protected to insure undamaged delivery.
• All pipe threads meet the requirement of ASME/ANSI B1.20.1 (1983) for tapered pipe threads (NPT).
• Working pressures calculated in accordance with Power Piping Code ANSI B 31.1, Refiner Piping Code ASME/ANSI B 31.3 and section VIII of ASME Boiler & Pressure Vessel Code.

Pressure Ratings (psi)

Materials

Thank you to The HAM-LET Valve & Fitting Company. Source material HAM-LET Catalog. Any errors in the transcription of this data are solely the responsibility of JGB Enterprises, Inc. No warranty, including implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality is either expressed or implied of this product.