Banjo / 2 inch Wet Seal Cast Iron Self Priming Centrifugal Pump
Vendor: Banjo Corporation
Valve Type(s):
Miscellaneous Valves and Accessories
Valve Description:
| Request Quote |
Features
- FKM (viton type) double seal contained in ethylene glycol reservoir.
- Dynamically balanced impeller.
- All stainless steel hardware.
- Available in cast iron or 316 stainless steel, with bearing pedestal, gas engine or pump only.
Valve Category:
Pumps
Valve Subcategory
Pumps
| 2" WET SEAL SELF-PRIMING CENTRIFUGAL GAS DRIVEN PUMPS | ||
| Part No. | Description | HP |
| 201PI6PROW | 2" x 2" Cast Iron Pump x 6.5 HP Intek | 6.5 |
| 201PIH5W | 2" x 2" Cast Iron Pump x 5.5 HP Honda | 5.5 |
| 2" WET SEAL SELF-PRIMING CENTRIFUGAL PUMPS | ||
| 201PBIW | 2" x 2" Cast Iron Pump with Pedestal | N/A |
| 201POIW | 2" x 2" Cast Iron Pump Only | N/A |
| REPLACEMENT PARTS - WET SEAL 2" CAST IRON PUMPS | |||
| Ref. | Part No. | Description | Qty. |
| 1 | V10118 | 5/16" Lockwasher | 6 |
| 2 | V10119 | 5/16"-18 UNC SS Hexnut | 6 |
| 3 | 15022 | Handle | 1 |
| 4 | 17010 | Nut, Hex 1/2" - 13 UNC | 1 |
| 5 | 17018* | Gasket Adapter | 1 |
| 6 | 17123 | Clamp 5/8", 3/4" Shaft Assy. (Keyed) | 1 |
| 7 | 17226 | 2" Pump Housing | 1 |
| 8 | 17200A | 2" Wet Seal Assembly | 1 |
| 9 | 12882A | Bearing Pedestal | 1 |
| 10 | 17019 | 5/16"-18 x 3/4" HHCS | 4 |
| 11 | V10118 | 5/16" Lock Washer | 4 |
| 12 | 17002 | Flange - Inlet 2" | 1 |
| 13 | 17016 | Gasket -Check Valve Assy. EPDM | 1 |
| 14 | 17019 | 5/16"-18 x 3/4" HHCS | 4 |
| 15 | V10118 | 5/16" Lock Washer | 4 |
| 16 | 17000 | Flange - Outlet 2" | 1 |
| 17 | 17013 | Gasket - Outlet EPDM | 1 |
| 18 | 17212 | Liquid Level Tube | 1 |
| 19 | 17242 | Housing Stud | 6 |
| 20 | 17208 | Impeller | 1 |
| 21 | 17032 | 1/4" Pipe Plug | 1 |
| 22 | 17019 | Capscrew 5/16" - 18 x 3/4" | 4 |
| 23 | V10118 | 5/16" Lockwasher | 4 |
| 24 | 17211 | Male Elbow - Legris 3/16" | 2 |
| 25 | 17210 | 1/2" Fill Plug | 1 |
| 26 | 17202 | Cover Plate | 1 |
| 27 | 17018 | Gasket, Adapter | 1 |
| 28 | 17201A | Reservoir | 1 |
| 29 | 17235 | Mechanical Seal Assy. FKM (viton type) | 1 |
| 30 | 17009B | 5/8-18 Impeller Nut | 1 |
| 31 | 17206A | Adapter Shaft | 1 |
CAUTION-WARNING: Please do not restrict or reduce port sizes or dead head
pumps. This could cause component failure to pump. NO FLAMMABLES.
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |