Super Swivels
Female Pipe (N.P.T.F.) X Male Face Seal (M.F.S.)

Vendor: Super Swivels

Coupling Type: Hydraulic Couplings & Adapters

Coupling Category:

90° Swivels

Super Swivels® are manufactured from Carbon Steel or 304 and 440c Stainless Steel and offered with a wide variety of seal options.

Super Swivels are used in a wide variety of applications, i.e. hose reels, hydraulic log loaders, paint equipment, automatic car washes, wrecker trucks, horizontal directional drilling, machine tool indexers, hydraulic wheel motors, hot tar applicators, robotics, power line equipment, railroad equipment, and mining equipment, to mention a few.

Options

Base Material

Super Swivels are manufactured from Carbon Steel or 304 and 440c Stainless Steel.

304 Stainless Steel (304) is recommended for low pressure corrosive environments.

440c Stainless Steel (SS) is a martensitic, high carbon, magnetic stainless steel, heat-treated to maintain a high-pressure rating. Not as corrosion resistant as 300 Series Stainless Steel.

All stainless steel swivels have a 4 to 1 proof pressure.

Seal Material

(V) Viton® (Fluorocarbon) – For most petroleum based applications. (-15°F to 250°F)

(AL) Aflas® (Tetrafluoroethylene-propylene copolymer)

• Better resistance to many individual chemicals.
• For service in high temperature environments.
• (Low temperature limitations.)
• (+32°F to 400°F)

Other seals available upon request:

• Buna
• EPR
• Neoprene
• Kalrez®

Please specify oxygen use when ordering. Super Swivels are not recommended for breathing air or steam.

PART NUMBER	O.A.L.	DIM. B	WRENCH /HEX	PORT T1 U.N.	STEM T2 N.P.T.F.	SWG. RADIUS	MAX. P.S.I.G.	THROUGH HOLE
9 SS 4 FP 25 X MFS 6	2.510	2.000	0.750	11/16-16	1/4-18	1.314	5000	0.265
9 SS 8 FP 38 X MFS 6	2.670	2.120	0.875	11/16-16	3/8-18	1.432	5000	0.265
9 SS 8 FP 38 X MFS 8	2.670	2.120	0.875	13/16-16	3/8-18	1.669	5000	0.265
9 SS 8 FP 50 X MFS 8	2.850	2.270	1.125	13/16-16	1/2-14	1.669	5000	0.265
9 SS 8 FP 50 X MFS 10	2.850	2.270	1.125	1-14	1/2-14	1.826	5000	0.265
9 SS 12 FP 75 X MFS 12	3.000	2.360	1.375	1 3/16-12	3/4-14	2.089	4500	0.389
9 SS 16 FP 100 X MFS 16	3.860	2.980	1.625	1 7/16-12	1-11 1/2	2.255	4000	0.484
9 SS 20 FP 125 X MFS 20	4.300	3.285	2.000	1 11/16-12	1 1/4-11 1/2	2.658	4000	0.718
9 SS 24 FP 150 X MFS 24	5.600	4.375	2.370	2-12	1 1/2-11 1/2	2.904	4000	0.844