Dixon Cam and Groove Fittings
Dixon EZ Boss-Lock Handles
Vendor: Dixon Cam and Groove Fittings
Coupling Type: Cam & Groove Couplings
Description:
316 Stainless Steel
Coupling Category:
Cam and Groove
- investment cast stainless steel cam arm and lever
- 316 stainless steel spring
- stainless steel pin, washer, plated carbon steel pull ring
| Size | Stainless Steel Part # |
| 3/4" - 1" | RHEZ175 |
| 1-1/4" - 2-1/2" | RHEZ152 |
| 3" and 4" | RHEZ34 |
| 6" and 8" | RHEZ6 |
 |
Under no circumstances should the EZ Boss-Lock cam arms be used on any fitting not specifically produced for their use. The aluminum, brass and iron are made from sand castings. To ensure proper functioning of the EZ Boss-Lock cam arm assemblies, Dixon sorts the castings to ensure there is sufficient length and orientation on the lugs on the main casting to engage the lever. Dixon also buffs or grinds the rougher sand cast surface to ensure that the lever will move freely. The EZ Boss-Lock cam arms cannot be retrofitted onto existing aluminum, brass or plated iron Boss-Lock already in service. |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |