Dyna Flex
SAE 100R7 711 (Black)
Types:
Hydraulic Hose
Vendor: Dyna Flex
Application:
Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R7 requirements. For pneumatic or gaseous systems, use perforated (pin-pricked) hose.Tube:
Oil resistant synthetic polyester tube
Reinforcement:
Braided high tensile synthetic fiber
Cover:
Black high abrasion resistant polyurethane
Temperature:
-65 degrees F. to +212 degrees F.
(-54 degrees C. to +100 degrees C.)
Colors:
Black
| Hose Part No. | Nominal I.D. | Nominal O.D. | Maximum Oper. Press. | Minimum Burst Press. | Min. Bend Radius (In.) | Wgt. Per 100 Ft. (Lbs.) | Request a Quote | ||||
| In. | mm. | In. | mm. | PSI | BAR | PSI | BAR | ||||
| 701-02* | 1/8 | 3.18 | .305 | 7.75 | 3,000 | 207 | 12,000 | 827 | 1/2 | 2.5 | Request a Quote |
| 711-03 | 3/16 | 4.76 | .405 | 10.29 | 3,250 | 224 | 13,000 | 896 | 3/4 | 5.5 | Request a Quote |
| 711-04 | 1/4 | 6.35 | .505 | 12.83 | 3,000 | 207 | 12,000 | 827 | 1-1/4 | 7.0 | Request a Quote |
| 711-05 | 5/16 | 7.94 | .585 | 14.86 | 2,500 | 172 | 10,000 | 689 | 1-3/4 | 10.0 | Request a Quote |
| 711-06 | 3/8 | 9.53 | .645 | 16.38 | 2,250 | 155 | 9,000 | 620 | 2 | 10.5 | Request a Quote |
| 711-08 | 1/2 | 12.70 | .810 | 20.57 | 2,000 | 138 | 8,000 | 552 | 3 | 15 | Request a Quote |
| 711-12 | 3/4 | 19.05 | 1.11 | 28.19 | 1,250 | 86 | 5,000 | 345 | 9-1/2 | 29 | Request a Quote |
| 711-16 | 1 | 25.40 | 1.42 | 36.07 | 1,000 | 69 | 4,000 | 276 | 12 | 40 | Request a Quote |
* 1/8" I.D. does not apply to SAE100R7
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |