Smart-Hose Technologies
Acetylene Hoses with Decomposition Resistant Rubber
WHAT IS SMART-HOSE™ ? A Flexible "Safety System" for use in the transfer of high pressure gases and liquids. Protect against the hazardous effects of hose rupture, pull-apart and failure.
All Smart-Hose™ designs, Smart-Hose™ I, Smart-Hose™ I with breakaway, Smart-Hose™ II andSmart-Hose™ III all utilize the unique, patented and patent pending design eliminates the potential for disaster through the use of an internal cable connected to specially designed, normally unseated valve "wedges or plungers" located on each end of the cable. In the event of hose separation, stretching to the point of an unsafe condition or coupling-to-hose separation, the valve "wedges or plungers" are released and instantly seat stopping the flow in both directions.
APPLICATION:
CONSTRUCTION:
All Smart-Hose™ designs, Smart-Hose™ I, Smart-Hose™ I with breakaway, Smart-Hose™ II andSmart-Hose™ III all utilize the unique, patented and patent pending design eliminates the potential for disaster through the use of an internal cable connected to specially designed, normally unseated valve "wedges or plungers" located on each end of the cable. In the event of hose separation, stretching to the point of an unsafe condition or coupling-to-hose separation, the valve "wedges or plungers" are released and instantly seat stopping the flow in both directions.
APPLICATION:
- The hose marking -"ELJIKA".
- CTE Approved -decomposition testing at Air Liquide –CTE Report -CTE 2003/JPS 298 under the name of HYDREG.
CONSTRUCTION:
- Hose material is non static conducting EPDM (Ethylene/propylene) electrically continuous with the 2 steel braids in contact with the fittings.
- The service pressure is 30 bar max with burst pressure in excess of 1300 bar.(identified on the hose)
- Internal diameter of the hose is 6 mm.
- The permanently attached fittings and Smart-Hose Fittings at both ends are brass with a copper content of 58%;
- The snap rings are stainless steel and the cable is stainless steel.
Rubber Acetylene Hoses | Request Quote | ||||||
P22-002-16-0024 | 24" x 1/4" NPT | LL1 | Naval Brass | FNPT W/SS Snap Rings | 4500 Psi WP | 18,000 PSI WP | Request Quote |
P22-002-16-0032 | 32" x 1/4" NPT | LL1 | Naval Brass | FNPT W/SS Snap Rings | 4500 Psi WP | 18,000 PSI WP | Request Quote |
P22-002-16-0036 | 36" x 1/4" NPT | LL1 | Naval Brass | FNPT W/SS Snap Rings | 4500 Psi WP | 18,000 PSI WP | Request Quote |
P22-002-16-0048 | 48" x 1/4" NPT | LL1 | Naval Brass | FNPT W/SS Snap Rings | 4500 Psi WP | 18,000 PSI WP | Request Quote |
P22-002-16-0060 | 60" x 1/4" NPT | LL1 | Naval Brass | FNPT W/SS Snap Rings | 4500 Psi WP | 18,000 PSI WP | Request Quote |
P22-002-16-0072 | 72" x 1/4" NPT | LL1 | Naval Brass | FNPT W/SS Snap Rings | 4500 Psi WP | 18,000 PSI WP | Request Quote |
P22-004-11-60 | 60" x 1/2" NPT | LL1 | Naval Brass | FNPT W/SS Snap Rings | 4500 Psi WP | 18,000 PSI WP | Request Quote |
P22-004-11-120 | 102" x 1/4" NPT | LL1 | Naval Brass | FNPT W/SS Snap Rings | 4500 Psi WP | 18,000 PSI WP | Request Quote |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |