Gates
Black Gold Oilfield Service 400SD

Types:
Petroleum Hose     Sub Type: Petroleum Petro Transfer Hose

Vendor: Gates

Application:

Transfer of water, petroleum based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. For bio-diesel and other native fuel applications, see Fuel Master XTreme 150 SD. Petroleum transfer hoses may be used with all grades of bio-diesel only if the exposure is intermittent and the hose is drained between uses.

CAUTION: Do not convey fuels over 120®F (+49®C).

Tube:

Type C (Nitrile). Black.

Reinforcement:

Synthetic, high tensile textile with steel wire helix.

Cover:

Type A (Neoprene). Black with red spiral stripe.

Temperature:

-40°F to +180°F (-40°C to +82°C) continuous service.

Packaging:

200’ length coiled and wrapped in polyethylene.

Branding:

Continuous transfer label. Example: "GATES® Black Gold® Oilfield Service 400SD psi (2.76 MPa) WP Made in U.S.A.."

Couplings:

Contact JGB for proper hose fitting requirements.

Standards:

Tube:  RMA (Class A) High oil resistance.

Design Factor:

4:1

Item No.	Nom. ID		Nom. OD		Min. Bend Radius		Suction		Max. W.P.		Wt. Per Ft.		Request a Quote
	In	mm	In	mm	In	mm	In / Hg	mm / Hg	psi	MPa	Lbs.	Kg
4688-0590	2	50.8	2.84	72.1	15.0	381	30.0	762	400	2.76	2.03	.92	Request Quote
4688-0591	3	76.2	4.00	101.6	20.0	508	30.0	762	400	2.76	3.66	1.66	Request Quote
4688-0592	4	101.6	4.99	126.8	25.0	635	30.0	762	400	2.76	4.64	2.11	Request Quote