ITR/Pirelli
IT 312
Types:
Special Application
Vendor: ITR/Pirelli
Application:
Medium pressure applications with laundry equipment. Plastic molding presses, steam, compressor discharge, virtually all chemical applications. Not recommended for steam/cold water cycling. Meets requirements of SAE 100 R14.Tube:
Extruded PTFE tube.
Reinforcement:
AISI 304 stainless steel single wire braid.
Temperature:
-65°F to 450°F. -55°C to 240°C.
Category:
Medium Pressure PTFE Hose
| I.D. | Size | Nominal I.D. (in) | Nominal O.D. (in) | Pressure (psi) at Room Temp | Min Bend Radius | Weight (lbs) Per 100 Ft | REQUEST QUOTE | ||
| in | mm | Max Working | Min Burst | ||||||
| 1/8 | 3.2 | 3 | 0.13 | 0.25 | 3,000 | 12,000 | 1.5 | 4.7 | Request a Quote |
| 3/16 | 5.0 | 4 | 0.19 | 0.31 | 3,000 | 12,000 | 2.0 | 6.7 | Request a Quote |
| 1/4 | 6.5 | 5 | 0.25 | 0.38 | 3,000 | 12,000 | 3.0 | 9.5 | Request a Quote |
| 5/16 | 8.0 | 6 | 0.31 | 0.44 | 2,500 | 10,000 | 4.0 | 11.5 | Request a Quote |
| 13/32 | 10.5 | 8 | 0.42 | 0.55 | 2,000 | 8,000 | 5.5 | 16.5 | Request a Quote |
| 1/2 | 13.0 | 10 | 0.50 | 0.64 | 1,500 | 6,000 | 6.5 | 19.0 | Request a Quote |
| 5/8 | 16.0 | 12 | 0.63 | 0.77 | 1,200 | 4,800 | 7.5 | 23.0 | Request a Quote |
| 3/4 | 19.0 | 14 True Bore | 0.75 | 0.89 | 1,000 | 4,000 | 90 | 27.5 | Request a Quote |
| 7/8 | 22.0 | 16 | 0.88 | 1.03 | 1,000 | 4,000 | 10.5 | 32.5 | Request a Quote |
| 1 | 25.0 | 18 True Bore | 1.00 | 1.14 | 900 | 3,600 | 12.0 | 38.0 | Request a Quote |
| 1 1/8 | 29.0 | 20 | 1.12 | 1.29 | 625 | 2,500 | 16.0 | 43.0 | Request a Quote |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |