ITR/Pirelli
PZ 333

Types:
Hydraulic Hose

Vendor: ITR/Pirelli

Application:

Pulsating pressure hydraulic oil lines where excessive pressures are greater than SAE 100 R2/B and require flexibility. All sizes have exceeded 1,000,000 impulse cycles tested at 133 percent of working pressure. Meets Flame Resistance Acceptance Designation.

Tube:

Seamless black synthetic rubber. Oil resistant.

Reinforcement:

Two nated spirals and one braid of superior high-tensile steel wire.

Cover:

Black synthetic rubber. Resistant to abrasion, oil, fuel, and weathering.

Temperature:

-40°F to 200°F with peaks up to 250°F. -40°C to 120°C.

Order Codes:

Special Order Only

Category:

Pulsating Pressure Hose

I.D.		Size	I.D.	Tolerances		O.D (in)		Braid Diameter		Pressures (psi)		Min Bend Radius	Weight (lbs) Per 100 Ft	REQUEST QUOTE
in	mm			+	-	Min	Max	Min	Max	Working	Min Burst
1/4	6.5	4	0.250	0.023	0.008	0.65	0.72	0.48	0.52	6,400	25,600	4.0	36	Request a Quote
3/8	9.5	6	0.375	0.023	0.008	0.81	0.88	0.63	0.68	5,350	21,400	5.0	42	Request a Quote
1/2	13.0	8	0.500	0.031	0.015	0.94	1.00	0.75	0.81	5,000	20,000	7.0	48	Request a Quote
5/8	16.0	10	0.625	0.031	0.015	1.06	1.13	0.88	0.94	4,300	17,200	8.0	52	Request a Quote
3/4	19.0	12	0.750	0.031	0.015	1.22	1.28	1.03	1.09	3,900	15,600	9.5	69	Request a Quote
1	25.0	16	1.000	0.040	0.015	1.52	1.61	1.34	1.41	3,300	13,200	12.0	107	Request a Quote