Parker Industrial
Anhydrous Ammonia Hose - Series 7262

Types:
Chemical Hose Sub Type: Chemical Transfer Hose

Vendor: Parker Industrial

Application:

Anhydrous Ammonia Hose Nylon Reinforced
Series 7262

Anhydrous ammonia
In-plant and tank transfer, transport and delivery; fertilizer dispensing
Agriculture

Series 7262 is a lightweight anhydrous ammonia transfer hose. The hose construction incorporates corrosion resistant high tensile nylon braids for flexibility and kink resistance. The perforated cover is resistant to abrasion, mild chemicals and ozone, and the distinctive dual green stripes provide color-coded identification.

NOTES:

Do not use with LPG or natural gas.
Contact JGB for chemical compatibility information, and for suitability for non-agricultural/industrial refrigeration applications.
Series 7262 is a non-stock, seasonal product available only through Parker Select Anhydrous Ammonia Hose Assembly Fabricators.

Design Factor: 5:1
Vacuum: Not recommended
Industry Standards: ARPM IP-14

Tube:

Black EPDM

Reinforcement:

Multiple textile braids

Cover:

Black EPDM; perforated wrapped finish

Temperature:

-40° F to +180° F

Packaging:

Branding:

PARKER SERIES 7262 NYLON ANHYDROUS AMMONIA - (YEAR) - REMOVE NO LATER THAN (YEAR +6) - 350 PSI MAX WP ARPM (BATCH CODE) CAUTION ANHYDROUS AMMONIA USE ONLY - (YEAR) -REMOVE NO LATER THAN (YEAR +6)

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black with two green stripes

Part Number	ID	ID	Reinf Plies	OD	OD	Approx Wt	Min Bend Rad	Max Rec WP	Std Pack	Request Quote
Part Number	(in)	(mm)	Reinf Plies	(in)	(mm)	(lbs/ft)	(in)	(psi)	Qty (ft)	Request Quote
7262-1002	1	25.4	2	1.51	38.1	0.49	10	350	50	Request Quote
7262-1252	1-1/4	31.8	2	1.781	45.2	0.61	12	350	50	Request Quote
7262-1502K	1-1/2	38.1	2	2.03	51.6	0.73	14	350	50	Request Quote
7262-2003K	2	50.8	3	2.75	69.9	1.4	16	350	50	Request Quote
7262-502	1/2	12.7	2	0.95	24.1	0.25	5	350	50	Request Quote
7262-752	3/4	19.1	2	1.25	31.8	0.38	8	350	50	Request Quote

Hose Assemblies: Available only from Parker Select Anhydrous Ammonia Hose Assembly Fabricators.

WARNINGS!

Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
For Anhydrous Ammonia use ONLY. Do not use in Liquid Petroleum Gas (LPG)/Propane or Natural Gas applications. Use only with couplings qualified by Parker. Do not use with couplings containing hidden o-rings such as male swivel couplings. For non-agricultural or refrigeration applications, contact JGB.
Contact with Anhydrous Ammonia (NH3) will burn skin and is especially damaging to the eyes and lungs. This is true for its liquid and gaseous (vapor) state. Many accidents involving NH3 have occurred by using the wrong hose. NH3 hose must be specially compounded and constructed to handle the media. NEVER use a hose that is not designed for NH3 because it may fail very quickly and cause bodily injury or death. It is especially important to ensure that only Anhydrous Ammonia hose is recommended and used for this service. Refer to ARPM Publications IP-14 “Anhydrous Ammonia Hose, Specifications” and IP-11-2 “Anhydrous Ammonia Hose, Manual for Maintenance, Testing and Inspection.”