Parker Industrial
BS and W Corrugated Oil Field Suction / Vacuum Hose - Series 7213E

Types:
Petroleum Hose     Sub Type: Petroleum Suction & Discharge Hose
Suction & Discharge     Sub Type: Petroleum Suction & Discharge / Water Suction & Discharge Hose
Water Hose     Sub Type: Water Suction & Discharge Hose

Vendor: Parker Industrial

Application:

BS & W™ Corrugated Oil Field Suction / Vacuum Hose
Series 7213E

• Brine, crude oil, mild chemicals, petroleum waste, sediments, sludge, slurries, water
• Oil field waste recovery, general industrial

Series 7213E is a flexible, lightweight suction and discharge hose designed to handle brine, crude oil, mild chemicals, petroleum waste, sediments, sludge, slurries and water in harsh oil field bottom sediment and waste pit recovery applications. The corrugated hose construction incorporates a wire helix that provides full suction capability, flexibility, kink resistance, and a path to conduct a static electrical charge to ground. The nitrile/SBR cover is resistant to abrasion, oil and weathering.

NOTE:  Do not use with refined oil or fuel.

Industry Standards:  None applicable
Vacuum:  Full

Tube:

Black nitrile/SBR

Reinforcement:

Multiple textile plies with wire helix

Cover:

Black nitrile/SBR; corrugated wrapped finish

Temperature:

-22°F to +185°F (-30°C to +85°C)

Packaging:

Coils

Branding:

PARKER SERIES 7213E BS&W OIL FIELD SUCTION HOSE 150 PSI MAX WP

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black with blue stripe

Part No.	ID	ID	Reinf Plies	OD	OD	Approx Wt	Min Bend Rad	Max Rec WP	Std Pack Qty	Request Quote
	(in)	(mm)		(in)	(mm)	(lbs/ft)	(in)	(psi)	(ft)
7213E-1500	1-1/2	38.1	2	1.976	50.2	0.86	4	150	100	Request Quote
7213E-2000	2	50.8	3	2.441	62	1.02	5	150	100	Request Quote
7213E-2500	2-1/2	63.5	3	2.953	75	1.29	6.2	150	100	Request Quote
7213E-3002	3	76.2	3	3.504	89	1.52	7.6	150	100	Request Quote
7213E-4002	4	101.6	3	4.567	116	2.49	12	150	100	Request Quote

Warning! Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.