Parker Industrial
ARCTIC TRANSLITE Low Temperature Corrugated Tank Truck Hose - Series SWC325

Types:
Petroleum Hose     Sub Type: Petroleum Petro Transfer Hose

Vendor: Parker Industrial

Application:

ARCTIC TRANSLITE® Low Temperature Corrugated Tank Truck Hose
Series SWC325

• Biodiesel (to B100 in dedicated service), diesel, ethanol, gasoline, oil
• Low temperature in-plant and storage tank transfer
• Low temperature delivery, transport

Series SWC325 is a flexible, lightweight, low temperature suction and discharge hose designed to handle oil and refined fuels such as biodiesel (to B100 in dedicated service), diesel, ethanol and gasoline. The corrugated hose construction incorporates a dual wire helix that provides full suction capability, flexibility and kink resistance—even in the harshest cold climate conditions to -67°F (-55°C)—and a path to conduct a static electrical charge to ground. The cover is resistant to abrasion, oil and weathering.

Design Factor:  4:1
Vacuum:  Full
Industry Standards:  None applicable

Tube:

Black Nitrile

Reinforcement:

Multiple textile plies with dual wire helix

Cover:

Black nitrile; corrugated wrapped finish

Temperature:

-67°F to +180°F (-55°C to +82°C)

Packaging:

Coils

Branding:

PARKER SERIES SWC325 ARCTIC TRANSLITE® -67°F LOW-TEMP TANK TRUCK HOSE XXX PSI WP MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black with blue stripe

Part No.	ID	ID	Reinf Plies	OD	OD	Approx Wt	Min Bend Rad	Max Rec WP	Std Pack	Request Quote
	(in)	(mm)		(in)	(mm)	(lbs/ft)	(in)	(psi)	Qty (ft)
SWC325-1500	1-1/2	38.1	2	2.08	52.8	0.83	1.5	150	100	Request Quote
SWC325-2000	2	50.8	2	2.58	65.5	1.19	2	150	100	Request Quote
SWC325-2500	2-1/2	63.5	2	3.12	79.2	1.56	2.5	150	100	Request Quote
SWC325-3000	3	76.2	2	3.68	93.5	2.12	3	150	100	Request Quote
SWC325-4000	4	101.6	2	4.68	118.9	2.79	4	150	100	Request Quote
SWC325-6000	6	152.4	2	6.75	171.5	4.87	6	125	100	Request Quote

Warnings! Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines. Do not use for oil or fuel transfer service in or on open water.