Fresno Series 4200 - Type W Pressure Gate

Valve Category:

Gates & Lifts

Manufacturer

Fresno Valves & Castings

Rugged Cast Iron frame for long life. Precision ground seats for watertight operation.

Single center wedge design distributes uniform pressure at the seating surface.

Convex slide for greater strength. Holds flow in both flow directions.


Request a Quote
Request Quote

Pressure Rating

Maximum seating        60 (26 psi)

Maximum unseating   10 (4.5 psi)

Installation

Series 4200 Pressure Gates are normally mounted on head walls or in pipe stands, using steel anchor bolts and grout.   Flange back models may also be installed on pipe flanges.

Options

  • Bronze seating surfaces
  • Rising Stem
  • Stem extensions
 
  • Tapered setting collar for concrete installations
  • Special coatings
  • Stainless steel frame & fasteners

Series 4200 Type W Pressure Gate

Valve Size Weight (lbs.) Dimensions (inches)
A B C D E F G H I
6" 30 15.13 4.25 9.13 2.25 11.5 7.75 1.69 0.88 4.31
8" 40 18 6.13 11.38 2.25 14 7.75 1.69 0.88 4.4
10" 56 21.5 6.88 13.38 2.25 16.5 7.75 1.69 0.88 4.45
12" 104 24.19 8 16 2.25 19.75 9.88 1.69 1 5.75
14" 107 26.31 9.44 18.94 2.25 20.5 9.88 1.69 1 6.38
16" 131 29.75 10.38 20.75 2.25 23.31 9.88 1.69 1 6.62
18" 158 33.31 10.94 23.88 2.25 26.25 9.88 1.69 1 6.75
20" 249 40 12 26.25 2.25 28.25 15.88 2.25 1.25 8.75
24" 380 45 14.25 29.5 2.25 34.5 15.88 2.25 1.25 9.75

 

Fresno Series 4200 - Type W Pressure Gate
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov