Aeroquip - FC300 Single Wire Braid Hose

FC300 Single Wire Braid Hose

Vendor: Aeroquip

Category: Automotive Hose


Application:

Exceeds SAE 100R5

Hydraulics handling petroleum base fluids and air, gasoline, fuel and lubricating oils, fire resistant hydraulic fluids and other industrial fluids.

Tube:

AQP Elastomer tube

Reinforcement:

Polyester inner braid, single wire braid

Cover:

Blue polyester braid cover

Temperature:

–55°F to +302°F (–49°C to +150°C).,
Air not to exceed +250°F (+121°C).

Branding:

Continuous brand example: "Aeroquip FC300 AQP"

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Part Number Hose I.D. Hose O.D. Maximum
Operating
Pressure
Minimum
Burst
Pressure
Minimum
Bend
Radius
Vacuum
Service
Weight
of Hose
Request a Quote
mm in mm in bar psi bar psi mm in kPa in/Hg Kg/m lbs/ft
FC300-04 4,8 0.19 13,2 0.52 210,0 3000 840,0 12000 76,2 3.00 94,8 28 0,19 0.13 Request Quote
FC300-05 6,4 0.25 14,7 0.58 210,0 3000 840,0 12000 85,9 3.38 94,8 28 0,24 0.16 Request Quote
FC300-06 7,9 0.31 17,3 0.67 157,0 2250 630,0 9000 101,6 4.00 94,8 28 0,27 0.23 Request Quote
FC300-08 10,4 0.41 19,6 0.76 140,0 2000 560,0 8000 117,3 4.62 94,8 28 0,32 0.26 Request Quote
FC300-10 12,7 0.50 23,4 0.93 122,0 1750 490,0 7000 139,7 5.50 94,8 28 0,49 0.37 Request Quote
FC300-12 16,0 0.63 27,4 1.08 105,0 1500 420,0 6000 165,1 6.50 94,8 28 0,58 0.46 Request Quote
FC300-16 22,4 0.88 31,2 1.27 56,0 800 224,0 3200 187,5 7.38 67,7 20† 0,55 0.44 Request Quote
FC300-20 28,4 1.12 38,1 1.50 43,0 625 175,0 2500 228,6 9.00 67,7 20† 0,68 0.52 Request Quote
FC300-24 35,1 1.38 44,5 1.75 35,0 500 140,0 2000 266,7 10.50 50,8 15† 0,92 0.67 Request Quote
FC300-32‡ 46,0 1.81 56,4 2.22 21,0 300 84,0 1200 336,6 13.25 37,3 11† 1,28 0.94 Request Quote
FC300-40‡ 60,1 2.38 73,2 2.88 21,0 300 84,0 1200 609,6 24.00 27,1 8† 2,11 1.50 Request Quote

† Maximum negative pressures shown for -16 and larger are
suitable only for those which have suffered no external
damage or kinking. If greater negative pressures are required
for -16 and larger hoses, the use of an internal support coil is recommended.


‡ Does not meet SAE 100R5
pressure with reusable fittings.
-32 size rated to 350 psi with crimp fittings.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov