Thermoid - TYPE 120 FOOD - Gray Cover
Vendor: Thermoid
Category: Sanitary Food Grade
Sub Type: General Food Hose
Application:
Type 120 Food hose is designed for bulk truck
discharge and pneumatic handling of non-fat
food grade materials, plastic pellets and
powders. Type 120 Food hose complies with
the current FDA regulations. This hose can be
furnished with or without a static wire. It is also
available with straight or enlarged ends. The
natural rubber tube and SBR cover are both
abrasion resistant. The two plies of cord fabric
reinforcement allow the hose to be flexible
enough to be collapsed and rolled up on itself.
In service, this hose will round out when fully
pressurized.
Oil Resistance: Limited
Tube:
1/8" thick amber colored NR-FDA
Reinforcement:
Two plies of cord fabric
Cover:
1/16" thick gray SBR rubber
Temperature:
-40°F to +160°F
-40°C to +71°C
Packaging:
50 ft. lengths maximum, for flour use 25 ft. maximum
Branding:
Thermoid HBD Industries Type 120 Food Handling Hose Made In USA
Couplings:
Contact JGB for proper fitting recommendation and coupling procedure.
Colors:
Gray
| Nominal I.D. | Nominal O.D. | Plies | Working Pressure | Weight | Request a Quote | ||||
| In. | mm | In. | mm | psi | Mpa | lb/ft | kg/m | ||
| 5 | 127.00 | 5.56 | 141.29 | 2 | 15 | 0.10 | 2.50 | 3.72 | Request Quote |
| 6 | 152.40 | 6.56 | 166.69 | 2 | 15 | 0.10 | 3 | 4.46 | Request Quote |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |