Parker Industrial - SIAMEEZ Grade RM Twin Line Welding Hose - Series 7110

SIAMEEZ Grade RM Twin Line Welding Hose - Series 7110

Vendor: Parker Industrial

Category: Welding


Application:

SIAMEEZ®
Grade RM Twin Line Welding Hose
Red – Acetylene Only; Green – Oxygen Line
ARPM IP-7

Series 7110

  • Bending, brazing, cutting, fabricating, gouging, joining, piercing, pre-heating, post-heating, severing, soldering, straightening, surfacing, trimming
  • Assembly and fabrication shops, construction, factories, foundries, mines, oil rigs, plumbing, rail yards, salvage, scrapyards, shipyards, steel mills


Series 7110 is a twin line welding hose featuring a flame resistant and oil resistant cover. The red line is compatible ONLY with acetylene fuel gas, and the green line is compatible with oxygen. The non-blooming tube minimizes the migration of combustible waxes or plasticizers to the surface of the rubber, and the multiple plies of textile reinforcement provide flexibility. Series 7110 is also available in factory-fabricated and tested hose assemblies in popular configurations.

Design Factor:  4:1
Vacuum:  Not recommended
Industry Standards:  ARPM IP-7

Tube:

Black synthetic rubber

Reinforcement:

Multiple textile plies

Cover:

Red (acetylene) or green (oxygen) synthetic rubber; smooth finish

Temperature:

-40°F to +200°F (-40°C to +93°C)

Packaging:

Reels

Branding:

PARKER 7110 WELDING WARNING ACETYLENE ONLY (ID) MAX WP 200 PSI ARPM IP-7-(YEAR) STD

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Red or Green

Part No. ID ID Reinf
Plies
OD OD Approx
Wt
Approx
Wt
Min
Bend
Rad
Max
Rec
WP
Std
Pack
Request Quote
(in) (mm) (in) (mm) (lbs/ft) (kg/ft) (in) (psi) Qty (ft)
7110-191 3/16 4.8 2 0.438 11.1 0.16 0.07 2 200 800 Request Quote
7110-251 1/4 6.4 2 0.531 13.5 0.21 0.1 2.5 200 800 Request Quote
7110-311 5/16 7.9 2 0.594 15.1 0.28 0.13 3 200 750 Request Quote
7110-381 3/8 9.5 2 0.656 16.7 0.32 0.15 4 200 700 Request Quote

Warning!

  • Do not attempt to re-couple, repair or splice hose assemblies; replace all assemblies that show signs of abrading, abuse, age, damage or fatigue. Refer to ARPM IP-7, Specifications for Rubber Welding Hose and Hose Technical Bulletin 11-5, Guide for Use, Maintenance and Inspection of Welding Hose. Refer to CGA Safety Bulletin SB-11, Use of Rubber Welding Hose.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov