Texcel - TEX-STEAM / Steam Hose

TEX-STEAM / Steam Hose

Vendor: Texcel

Category: Steam Hose


Application:

Rugged, wire-braid steam hose recommended for saturated and superheated steam applications in chemical plants, shipyards and industrial plants.
NOTE:
Drain the hose after each use for maximum hose life.
Do not alternate use between steam and water.
Superheated steam will reduce the life of the hose
Consult JGB for the proper fitting recommendation and coupling procedure.

Safety Factor:

10:1

SATURATED (NOT SUPER-HEATED) STEAM

WARNING
  • Steam heat is hotter than 212ºF and increases in temperature as pressure increases.
  • Consult JGB to make sure the correct fittings are used for the application and for guidelines on proper assembly techniques.
  • If not controlled properly, exposure to steam can be hazardous and could cause serious injury or even death. In order to avoid serious injury or death, proper hose selection, installation, usage and maintenance is necessary.

Tube:

Black, heat resistant EPDM

Reinforcement:

High tensile steel wires

Cover:

Black, EPDM (pinpricked)

Temperature:

-40°F to 410°F for saturated steam
-40°F to 450°F for superheated

Branding:

TEXCEL TEX-STEAM WIRE BRAID STEAM HOSE – 250PSI AT 450F/SATURATED STEAM 410F – DO NOT ALTERNATE STEAM AND WATER – DRAIN AFTER USE (embossed)

Lengths:

Sold in Standard Lengths Only.

Colors:

Black

I.D.  Part Number O.D.  Std. Length Working Pressure (psi) Bend Radius Weight (Lbs./Ft.) Request a Quote
1/2 in STEAM-.50 15/16 in 50 ft. 250 3 in 0.37 Request Quote
3/4 in STEAM-.75 1-1/4 in 50 ft. 250 4 in 0.57 Request Quote
1 in STEAM-1.0 1-1/2 in 50 ft. 250 6 in 0.7 Request Quote
1-1/2 in STEAM-1.5 2-1/16 in 50 ft./100 ft. 250 8 in 1.1 Request Quote
2 in STEAM-2.0 2-11/16 in 50 ft. 250 10 in 1.5 Request Quote
2-1/2 in STEAM-2.5 3-7/32 in 100 ft. 250 11 in 2.29 Request Quote
3 in STEAM-3.0 3-25/32 in 100 ft. 250 13-1/2 in 2.85 Request Quote
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov