Gates - C5D High-Temp Multi-Fluid Hose

C5D High-Temp Multi-Fluid Hose

Vendor: Gates

Category: Hydraulic Hose


Application:

Petroleum–based or phosphate ester fluids; diesel fuels and filtration lines, transmission coolant lines, hot lube oil lines, power steering (CAUTION: Intended for heavy–duty commercial vehicle use only), gasoline and turbocharger oil supplies. Tilt cab cylinder and air brakes. C5D (–4 to –12) meets or exceeds DOT FMVSS 106–74 Type All, SAE J1402 Type All. Not approved for bio–diesel above B5.

DOT FMVSS 106–74 Type All, SAE J1402 Type All (–4 to –12).

Tube:

Black, oil and heat resistant, synthetic rubber (CPE).

Reinforcement:

One braid of high–tensile steel wire over one braid of polyester.

Cover:

Green for easy identification, oil and mildew resistant, polyester braid impregnated with synthetic rubber.

Temperature:

–40°F to +300°F (–40°C to +149°C). Air to +250°F (+121°C) only, maximum phosphate esters to +212°F (+100°C).

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Part No. Description Product No. Standard Pack Hose ID Hose OD WP Min. Burst MBR Request a Quote
In. In. psi psi In.
85680 4C5D X50FT 3658-0001 1 3/16 0.52 1500 6000 1 Request Quote
70540 4C5DXREEL 3658-0020 440 3/16 0.52 1500 6000 1 Request Quote
85681 5C5D X50FT 3658-0007 1 1/4 0.58 1500 6000 1.5 Request Quote
70541 5C5DXREEL 3658-0027 385 1/4 0.58 1500 6000 1.5 Request Quote
85682 6C5D X50FT 3658-0002 1 5/16 0.67 1500 6000 1.8 Request Quote
70542 6C5DXREEL 3658-0021 385 5/16 0.67 1500 6000 1.8 Request Quote
85683 8C5D X50FT 3658-0003 1 13/32 0.77 1250 5000 2 Request Quote
70543 8C5DXREEL 3658-0022 330 13/32 0.77 1250 5000 2 Request Quote
85684 10C5D X50FT 3658-0008 1 1/2 0.92 1250 5000 2 Request Quote
70544 10C5DXREEL 3658-0028 275 1/2 0.92 1250 5000 2 Request Quote
85685 12C5D X50FT 3658-0009 1 5/8 1.08 750 3000 2.3 Request Quote
70545 12C5DXREEL 3658-0029 220 5/8 1.08 750 3000 2.3 Request Quote
85686 16C5D X50FT 3658-0010 1 7/8 1.23 400 1600 3.5 Request Quote
70546 16C5DXREEL 3658-0030 165 7/8 1.23 400 1600 3.5 Request Quote
NOTE: Federal law requires registration with the Department of Transportation for anyone producing air brake hose assemblies with swaged or crimped fittings.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov