Continental ContiTech - Hydrocarbon Drain Hose – Braided

Hydrocarbon Drain Hose – Braided

Vendor: Continental ContiTech

Category: Special Application


Application:

This is a heavy-duty hose designed for hydrocarbon drain service. It is designed to clean out the hot residue created during steam cleaning and withstand harsh high heat and oil environments.

Tube:

Black nitrile

Reinforcement:

One-wire braid

Cover:

Blue Chlorosulfonated Polyethylene

Temperature:

-40˚F to 275˚F (-40˚C to 135˚C)

Packaging:

50' lengths

Branding:

Continental ContiTech Hydrocarbon Drain Hose® 300 psi with green layline

Couplings:

For 3/4": Premade factory assemblies and crimp specs available using ContiTech's one-piece non-skive B2- NPM-1212 hydraulic series fittings. Refer to the Industrial Hose Assembly Manual for crimp specifications. Also recommended are Campbell Fittings air hammer couplings to ensure a dedicated line for hydrocarbon use only.

Order Codes:

547-819
547-816 (green)

ID Nom. OD Max. WP Weight Request a Quote Request a Quote
in. mm in. mm. psi MPa lb./ft. kg./m Blue Green
3/4 19.1 1.10 27.94 300 0.43 0.14 0.21 Request Quote Request Quote
1 25.4 1.42 36.07 300 0.69 0.20 0.30 Request Quote -
Hose design ratio (burst pressure) 10:1.
Note: Not designed for steam service. Use Flexsteel® 250 Steam for steam service requirements.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov