Continental ContiTech - Insta-Grip 300 Hose

Insta-Grip 300 Hose

Vendor: Continental ContiTech

Category: Air and Multipurpose Hose


Application:

For use with push-on fittings at working pressures of 300 psi . For low-pressure hydraulic and pneumatic systems such as shop air systems, general industrial, maintenance and automotive assembly applications. Non-conductive, minimum electrical resistance, greater than 1 megohm per inch of hose length at 1000 volts DC . MSHA approved covers.

Tube:

Silicone is not used in the manufacturing of this hose . Chemivic oil- and heat-resistant synthetic rubber, ARPM Class A (High Oil Resistance)

Reinforcement:

One braided high-strength synthetic yarn laid at the most effective angle for maximum strength and coupling holding ability.

Cover:

Black, green, blue, red, yellow and gray (for others contact customer service); MSHA approved, weather-, abrasion- and oil-resistant synthetic rubber; ARPM Class B (Medium Oil Resistance).

Temperature:

-40°F to 210°F (-40°C to 99°C)

Packaging:

500' reels, maximum 4 pieces, 10' minimum

Branding:

Example: Insta-Grip™ 1/4" 300 psi WP Flame-resistant USMSHA 2G-IC-14C/33 Made in USA Continental ContiTech

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Order Codes:

535-278 (black)
535-279 (green)
535-294 (gray)
535-280 (red)
535-281 (blue)
535-277 (yellow)

Options:

Contact JGB Customer Service for special production run minimum requirements.

ID Nom. OD Max. WP Bend Radius Weight Request Quote Request Quote
in. mm in. mm in. MPa in. mm lbs./ft. kg/m Black Green
3/16 4.8 038 9.7 300 2.07 3 64 0.05 0.07 Request Quote -
1/4 6.4 0.54 13.7 300 2.07 3 64 0.09 0.13 Request Quote Request Quote
3/8 9.5 0.69 17.5 300 2.07 3 76 0.14 0.21 Request Quote Request Quote
1/2 12.7 0.81 20.6 300 2.07 5 127 0.17 0.25 Request Quote Request Quote
5/8 15.9 0.93 23.6 300 2.07 6 152 0.2 0.30 Request Quote Request Quote
3/4 19.1 1.07 27.2 300 2.07 7 178 0.26 0.39 Request Quote Request Quote
Hose design ratio (burst pressure) 4:1


ID Nom. OD Max. WP Bend Radius Weight Request Quote Request Quote
in. mm in. mm in. MPa in. mm lbs./ft. kg/m Gray Red
3/16 4.8 038 9.7 300 2.07 3 64 0.05 0.07 - -
1/4 6.4 0.54 13.7 300 2.07 3 64 0.09 0.13 Request Quote Request Quote
3/8 9.5 0.69 17.5 300 2.07 3 76 0.14 0.21 Request Quote Request Quote
1/2 12.7 0.81 20.6 300 2.07 5 127 0.17 0.25 Request Quote Request Quote
5/8 15.9 0.93 23.6 300 2.07 6 152 0.2 0.30 Request Quote Request Quote
3/4 19.1 1.07 27.2 300 2.07 7 178 0.26 0.39 Request Quote Request Quote
Hose design ratio (burst pressure) 4:1


ID Nom. OD Max. WP Bend Radius Weight Request Quote Request Quote
in. mm in. mm in. MPa in. mm lbs./ft. kg/m Blue Yellow
3/16 4.8 038 9.7 300 2.07 3 64 0.05 0.07 - -
1/4 6.4 0.54 13.7 300 2.07 3 64 0.09 0.13 Request Quote Request Quote
3/8 9.5 0.69 17.5 300 2.07 3 76 0.14 0.21 Request Quote Request Quote
1/2 12.7 0.81 20.6 300 2.07 5 127 0.17 0.25 Request Quote Request Quote
5/8 15.9 0.93 23.6 300 2.07 6 152 0.2 0.30 Request Quote -
3/4 19.1 1.07 27.2 300 2.07 7 178 0.26 0.39 Request Quote Request Quote
Hose design ratio (burst pressure) 4:1
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov