Vendor: Gates

Category: Oilfield
Category: Petroleum Hose    Sub Type: Petroleum Suction & Discharge Hose
Category: Suction & Discharge    Sub Type: Petroleum Suction & Discharge

---

Application:

Transfer of refined fuels (commercial gasoline and diesel fuel) oils and other petroleum products. Ideal for offshore/onshore transfer applications involving suction and discharge service for diesel oils and other similar petroleum products where an extremely lightweight, hardwall, flexible hose with a high rated working pressure and a small minimum bend radius is required. Transfer of water, petroleum based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking.

CAUTION:

For Bio–Diesel and other alternative fuel applications, see Fuel Master™ XTreme™. Petroleum transfer hoses may be used with all grades of Bio–Diesel only if the exposure is intermittent and the hose is drained between uses. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Do not convey fuels over +120°F (+49°C).

STANDARDS:

Tube: ARPM (Class A) High oil–resistance.

Design Factor:

4:1

Tube:

Type C (Nitrile). Black.

Reinforcement:

Synthetic, high tensile textile with steel wire helix.

Cover:

Type A (Chloroprene). Black with brown stripe.

Temperature:

-40°F to +180°F (-40°C to +82°C) continuous service.

Packaging:

Pallet

Couplings:

Contact JGB for proper hose fitting requirements.

Lengths:

200 ft. (6" ID also comes in 100 ft. lengths)

Category:

Petroleum Transfer Hose

Hose I.D.		Hose O.D.		Max. W.P.	Vac.	MBR	Wt. Per ft	Gates Item No.	Request a Quote
(in)	(mm)	(in)	(mm)	(psi)	(In. Hg)	(in)	(Lbs.)
2	50.8	2.78	70.6	300	30	10	1.6	4688-0584	Request Quote
3	76.2	3.86	98	300	30	18	2.59	4688-0585	Request Quote
4	101.6	4.87	123.7	300	30	24	3.52	4688-0587	Request Quote
6	152.4	7.07	179.6	300	30	36	5	4688-0589	Request Quote
6	152.4	7.07	179.6	300	30	36	6.67	4688-0588	Request Quote

 

---