Parker Industrial - SPARTAN UHMWPE Chemical Hose - Series SW593

SPARTAN UHMWPE Chemical Hose - Series SW593

Vendor: Parker Industrial

Category: Chemical Hose    Sub Type: Chemical Transfer Hose


Application:

SPARTAN™ UHMWPE Chemical Hose
Series SW593

  • Acids, chemicals, solvents
  • In-plant tank transfer
  • Delivery, transport

Series SW593 is a lightweight, high pressure, high temperature suction and discharge hose designed to handle approximately 98% of commonly used acids, chemicals and solvents. The ultra high molecular weight polyethylene (UHMWPE) tube will not leach into and contaminate the product being conveyed. The hose construction incorporates a dual wire helix that provides full suction capability, kink resistance, flexibility for ease of handling, and a path to conduct a static electrical charge to ground. The cover is resistant to abrasion, mild chemicals and ozone.

NOTES: Contact JGB for additional chemical compatibility information.

Design Factor:  4:1
Vacuum:  Full
Industry Standards:  None applicable

Tube:

Translucent ultra high molecular weight polyethylene (UHMWPE)

Reinforcement:

Multiple textile plies with dual wire helix

Cover:

Green EPDM; wrapped finish

Temperature:

-40°F to +250°F (-40°C to +121°C)

Packaging:

Coils

Branding:

PARKER SERIES SW593 SPARTAN™ UHMWPE CHEMICAL SUCTION HOSE 200 PSI WP

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Green with yellow stripe

Part Number ID ID Reinf Plies OD OD Approx Wt Min Bend Rad Max Rec WP Std Pack Request Quote
(in) (mm) (in) (mm) (lbs/ft) (in) (psi) Qty (ft)
SW593-1000 1 25.4 2 1.375 34.9 0.41 6 200 100 Request Quote
SW593-1500 1-1/2 38.1 2 1.875 47.6 0.63 9 200 100 Request Quote
SW593-2000 2 50.8 2 2.438 61.9 1.01 12 200 100 Request Quote
SW593-3000 3 76.2 2 3.44 87.3 1.63 18 200 100 Request Quote

WARNINGS!

  • It is the responsibility of the user to determine if the hose is suitable for the application. Most chemical resistance guides are based on temperatures of 70°F (21°C). Elevated temperatures can change the chemical resistance ratings. Many chemicals will become more aggressive as temperatures increase, reducing the ability of hose compounds to withstand them. Contact JGB for chemical compatibility data at elevated temperatures. If no data exists, users are required to perform compatibility testing at the desired temperature.
  • At operating temperatures of 125°F and above, only permanently attached couplings should be installed. At any operating temperature, couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
  • Do not use with internally expanded couplings. Refer to chemical hoses that incorporate a MXLPE tube
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov