Parker Industrial - FEP Chemical Hose - Series SW373

FEP Chemical Hose - Series SW373

Vendor: Parker Industrial

Category: Chemical Hose    Sub Type: Chemical Transfer Hose

Application:

FEP Chemical Hose FDA, USDA, 3-A
Series SW373

  • Non-fatty and non-oily foods and liquids, potable water, sanitary products
  • Acid, chemicals, solvents
  • In-plant and tank transfer, delivery, transport

Series SW373 is a premium quality high pressure, high temperature suction and discharge hose designed to handle approximately 99.5% of commonly used acids, chemicals and solvents, as well as food and sanitary materials. The fluorinated ethylene propylene (FEP) tube meets FDA, USDA and 3-A requirements, will not leach into and contaminate the product being conveyed, and features a temperature rating to 300°F (149°C). The hose construction incorporates a dual wire helix that provides full suction capability, kink resistance and a path to conduct a static electrical charge to ground. The cover is resistant to abrasion, mild chemicals and ozone.

NOTE: Contact JGB for additional chemical compatibility information.

Design Factor:  4:1
Vacuum:  Full
Industry Standards:  FDA, USDA, 3-A

Tube:

White fluorinated ethylene propylene (FEP)

Reinforcement:

Multiple textile plies with dual wire helix

Cover:

Yellow EPDM; wrapped finish

Temperature:

-40° to +300°F (-40°C to +149°C)

Packaging:

Coils

Branding:

PARKER SERIES SW373 FEP HOSE MEETS FDA, 3-A & USDA REQUIREMENTS XXX PSI WP MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Yellow with red stripe

Part Number ID ID Reinf Plies OD OD Approx Wt Min Bend Rad Max Rec WP Std Pack Request Quote
(in) (mm) (in) (mm) (lbs/ft) (in) (psi) Qty (ft)
SW373-1000 1 25.4 2 1.531 38.9 0.69 9 400 100 Request Quote
SW373-1250 1-1/4 31.8 2 1.75 44.5 0.75 11 375 100 Request Quote
SW373-1500 1-1/2 38.1 2 2.125 54 1.11 12 350 100 Request Quote
SW373-2000 2 50.8 2 2.688 68.3 1.57 16 300 100 Request Quote
SW373-3000 3 76.2 4 3.875 98.4 2.86 30 200 100 Request Quote
SW373-4000 4 101.6 4 5 127 4.28 42 150 100 Request Quote
SW373-500 1/2 12.7 2 0.969 24.6 0.37 7 500 100 Request Quote
SW373-750 3/4 19.1 2 1.25 31.8 0.55 8 500 100 Request Quote

WARNINGS!

  • It is the responsibility of the user to determine if the hose is suitable for the application. Most chemical resistance guides are based on temperatures of 70°F (21°C). Elevated temperatures can change the chemical resistance ratings. Many chemicals will become more aggressive as temperatures increase, reducing the ability of hose compounds to withstand them. Contact JGB for chemical compatibility data at elevated temperatures. If no data exists, users are required to perform compatibility testing at the desired temperature.
  • At operating temperatures of 125°F and above, only permanently attached couplings should be installed. At any operating temperature, couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
  • Do not use with internally expanded couplings. Refer to chemical hoses that incorporate a MXLPE tube.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov

JGB Home
JGB Military
News
Catalogs
About JGB
Become a Supplier

Copyright © 2000 - 2021 JGB Enterprises, Inc. All Rights Reserved

115 Metropolitan Drive, Liverpool, NY 13088 (Syracuse Area)
Largest INDUSTRIAL and HYDRAULIC HOSE Company in the United States!
Phone : (315) 451-2770
Contact us