Vendor: Parker Industrial

Category: Suction & Discharge    Sub Type: Water Suction & Discharge Hose
Category: Water Hose    Sub Type: Water Suction & Discharge Hose

---

Application:

Corrugated Fracturing (Frac) Tank Hose
Series 7307

• Brine, crude oil, mild chemicals, petroleum waste, sediments, sludge, slurries, water
• Frac tank transfer, oil field waste recovery, general industrial

Series 7307 is a versatile suction and discharge hose designed to handle brine, crude oil, drilling mud, mild chemicals, petroleum waste, sediments, sludge, slurries and water in oil field applications such as frac tank service. The corrugated hose construction incorporates a wire helix that provides full suction capability, flexibility, kink resistance, and a path to conduct a static electrical charge to ground. The nitrile/SBR cover is resistant to abrasion, oil and weathering. Series 7307 is available in 200-foot continuous lengths.

NOTE:  Do not use with refined oil or fuel.

Design Factor:  3:1
Vacuum:  Full
Industry Standards:  None applicable

Tube:

Black nitrile/SBR

Reinforcement:

Multiple textile plies with wire helix

Cover:

Black nitrile/SBR; corrugated wrapped finish

Temperature:

-20°F to +180°F (-28°C to +82°C)

Packaging:

Coils

Branding:

PARKER SERIES 7307 OILFIELD SUCTION & FRAC TANK HOSE 150 PSI MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black with blue stripe

Part No.	ID	ID	Reinf Plies	OD	OD	Approx Wt	Min Bend Rad	Max Rec WP	Std Pack Qty	Request Quote
	(in)	(mm)		(in)	(mm)	(lbs/ft)	(in)	(psi)	(ft)
7307-6000	6	152.4	3	6.71	170.4	4.55	18	150	100	Request Quote
7307-8000	8	203.2	3	8.8	223.5	6.9	24	150	100	Request Quote

Warning! Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.

---