Parker Industrial - Lightweight Water Suction Hose - Series SW300

Lightweight Water Suction Hose - Series SW300

Vendor: Parker Industrial

Category: Suction & Discharge    Sub Type: Water Suction & Discharge Hose
Category: Water Hose    Sub Type: Water Suction & Discharge Hose


Application:

Lightweight Water Suction Hose
Series SW300

  • Slurries, water
  • Construction, general industrial, surface mines

Series SW300 is a large diameter, lightweight suction and discharge hose for slurries and water. The hose construction incorporates a dual wire helix that provides full suction capability and kink resistance. The SBR cover is resistant to abrasion and weathering.

NOTE:
For larger diameter hose, refer to Series EW300.

Design Factor:  4:1
Vacuum:  Full
Industry Standards:  None applicable

Tube:

Black SBR

Reinforcement:

Multiple textile plies with dual wire helix

Cover:

Black SBR; wrapped finish

Temperature:

-40°F to +180°F (-40°C to +82°C)

Packaging:

Coils

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black with blue stripe

Part No. ID ID Reinf
Plies
OD OD Approx Wt Min
Bend
Rad
Max
Rec
WP 
Std
Pack
Qty 
Request Quote
(in) (mm) (in) (mm) (lbs/ft) (in) (psi) (ft)
SW300-6000 6 152.4 2 6.625 168.3 3.64 30 100 100 Request Quote
SW300-8000 8 203.2 4 9.188 233.4 11.07 48 100 100 Request Quote

Warning!

  • Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov