Manuli Rubber Industries - Pushfit

Pushfit

Vendor: Manuli Rubber Industries

Category: Hydraulic Hose


Application:

PUSH-ON HOSE, SAE J30 R6

Push-on hose for low pressure lines, return lines, drain lines. Used in fuel system or in the crankcase of internal combustion engines in mobile (truck, bus, off-highway, vehicles), stationary and marine applications.


KEY PERFORMANCE

  • Push-on hose with MF2000® Push-Lock type without ferrule
  • High aging resistance 
  • Fuel application with push-on fittings (clamps recommended in fuel applications)

Tube:

Fuel and oil resistant synthetic rubber compound

Reinforcement:

One textile braid (1TB)

Cover:

Environment resistant synthetic rubber

Temperature:

CONTINUOUS SERVICE -40°F/+212°F or -40°C/+100°C
MAX OPERATING TEMPERATURE (Intermittent service) 250°F / 121°C

Recommended Fluids: Mineral oils, vegetable and rape seed oils, glycol and
polyglycol based oils, synthetic ester based oils, oils in
aqueous emulsion, water, diesel fuel, gasoline
Insert: MF2000® - PUSH-LOCK TYPE
Applicable Specs.: SAE J30 R6
Type Approvals: GOST-R

PART. REF. HOSE SIZE R.O.D. O.D. MAX W.P. BURST
PRESSURE
MIN. BEND
RADIUS
WEIGHT FITTING  Request Quote
DN dash inch mm inch mm inch bar psi bar psi mm inch g/m lb/ft
H09066006 6 -4 1/4 - - 12,7 0,50 35 510 140 2030 76 2,99 130 0,09 MF2000®PUSH-LOCK Request Quote
H09066008 8 -5 5/16 - - 14,3 0,56 35 510 140 2030 76 2,99 160 0,11 MF2000®PUSH-LOCK Request Quote
H09066010 10 -6 3/8 - - 15,8 0,62 35 510 140 2030 76 2,99 175 0,12 MF2000®PUSH-LOCK Request Quote
H09066012 12 -8 1/2 - - 19,6 0,77 25 360 100 1450 127 5,00 235 0,16 MF2000®PUSH-LOCK Request Quote
H09066016 16 -10 5/8 - - 23,6 0,93 25 360 100 1450 150 5,91 320 0,21 MF2000®PUSH-LOCK Request Quote
H09066019 19 -12 3/4 - - 28,3 1,11 21 300 84 1210 180 7,09 470 0,31 MF2000®PUSH-LOCK Request Quote
H09066025 25 -16 1 - - 33,9 1,33 14 200 56 810 240 9,45 525 0,35 MF2000®PUSH-LOCK Request Quote
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov