Parker Industrial - Hot Tar and Asphalt Hose - Series SW387

Hot Tar and Asphalt Hose - Series SW387

Vendor: Parker Industrial

Category: Material Handling Hose    Sub Type: Material Handling Bulk Transfer Hose
Category: Petroleum Hose    Sub Type: Petroleum Suction & Discharge Hose
Category: Suction & Discharge    Sub Type: Petroleum Suction & Discharge


Application:

Hot Tar & Asphalt Hose
Series SW387

  • Hot asphalt, glue, oil, tar
  • In-plant and storage tank transfer
  • Delivery, transport applicator trucks

Designed for bulk transfer and delivery of hot petroleum products and hot wax. Will handle full suction and discharge pressures.

Design Factor:  4:1
Vacuum:  Full
Industry Standards:  None applicable

Tube:

Black Nitrile

Reinforcement:

Multiple textile plies with dual wire helix

Cover:

Black nitrile; wrapped finish

Temperature:

-40°F to +350°F (-40°C to +177°C)

Packaging:

Coils

Branding:

PARKER SERIES SW387 HOT TAR & ASPHALT XXX PSI WP MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black with red stripe

Part No. ID ID Reinf
Plies
OD OD Approx Wt Approx Wt Min
Bend
Rad
Max
Rec
WP 
Std
Pack
Qty 
Request Quote
(in) (mm) (in) (mm) (lbs/ft) (kg/ft) (in) (psi) (ft)
SW387-1500 1-1/2 38.1 2 2.125 54 0.98 0.44 6 150 100 Request Quote
SW387-2000 2 50.8 2 2.625 66.7 1.43 0.65 8 150 100 Request Quote
SW387-2500 2-1/2 63.5 2 3.375 85.7 1.84 0.83 10 150 100 Request Quote
SW387-3000 3 76.2 2 3.75 95.3 2.42 1.1 12 150 100 Request Quote
SW387-4000 4 101.6 2 4.813 122.2 3.6 1.63 18 150 100 Request Quote

Warning!

Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov