Kuriyama - Piranhaflex 100R8 Series PF628/PF628NC

Piranhaflex  100R8 Series PF628/PF628NC

Vendor: Kuriyama

Category: Hydraulic Hose


Application:

Piranhaflex™ PF628 Series hose is ideal for general purpose high pressure hydraulic applications with working pressures of 2,250 to 5,000 psi (depending on size). This hose is commonly used in industrial hydraulic construction, material handling, and agricultural equipment. Piranhaflex™ PF628NC Series hose has an orange, non pin-pricked cover ideal for use in applications where a non-conductive high pressure hydraulic hose is required. Typical applications include: hydraulic tools, lubrication lines and man lifts.

FEATURES:

  • Extremely durable
  • Good kink resistance
  • Lightweight-less than about half that of comparable rubber/wire hose.
  • Meets or exceeds SAE 100R8 impulse requirements at half of SAE recommended bend radius standards
  • Will not swell or degrade in contact with most hydraulic fluids or oils
  • Highly abrasion resistant
  • Inner tube will not chip or peel in service, eliminating the possibility of system contamination.
  • Linear change +/-3% under typical operating pressure.

PACKAGING:

  • Hoses supplied in 250 ft. reels & 50 ft. box lengths. All reels will have no more than 2 pieces, with no piece less than 50’ in length.
  • All 50’ boxes contain only 1 piece of hose.
  • Twin Line on request

Tube:

Extruded seamless polyester inner tube.

Reinforcement:

Aramid fiber reinforcement.

Cover:

PF628 Series hose has a black highly abrasion resistant polyurethane pin picked cover;
Series PF628NC hose has an Orange non-conductive (REACH Compliant), non-pin pricked abrasion resistant polyurethane cover.

Temperature:

-40°F (-40°C) to +200°F (+93°C) for petroleum based hydraulic fluids.
-40°F (-40°C) to +140° F (+60°C) for water-based and phosphate-ester based hydraulic fluids.

Packaging:

Hoses supplied in 250 ft. reels & 50 ft. box lengths.

Branding:

PIRANHAFLEX SAE 100R8 and PIRANHAFLEX SAE 100R8 NON-CONDUCTIVE

Series Number Size
Code
Nominal ID Nominal OD Max.
Working†
Pressure
Min. Bending
Radius
Approx.
Weight
Coupling Recommendations Request Quote
(In) (mm) (In) (mm) (psi) (In) (mm) (lbs/100ft) AlfaCrimp
(One Piece)
Ferrules
(Two Piece)
PF628/PF628NC 04 1/4 6.5 0.485 12.3 5,000 2.00 50 7 N/A PFR-04 Request Quote
PF628/PF628NC 06 3/8 9.7 0.630 16.0 4,000 2.50 64 10 N/A PFR-06 Request Quote
PF628/PF628NC 08 1/2 12.9 0.820 20.8 3,500 3.50 89 17 N/A PFR-08 Request Quote
PF628/PF628NC 12 3/4 19.1 1.050 26.7 2,250 4.50 114 20 N/A PFR-12 Request Quote
† Minimum burst pressure 4-to-1 safety factor.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov