Parker Industrial - SUPER-FLEX FL-7 Barrier Fuel Line Hose - Series 389

SUPER-FLEX FL-7 Barrier Fuel Line Hose - Series 389

Vendor: Parker Industrial

Category: Special Application


Application:

SUPER-FLEX® FL-7 Barrier Fuel Line Hose CARB / SORE; EPA; SAE J30R7 / 30R14T2
Series 389

  • Low pressure fuel lines on blowers, grinders, mowers, off-road engines, pressure washers, saws
  • Biodiesel (to B20 in dedicated and non-dedicated service), diesel, ethanol, gasoline
  • Agricultural equipment, autos, buses, construction equipment, off-road equipment

Series 389 is a fuel line/vapor emission hose for refined fuels such as biodiesel (to B20 in dedicated and non-dedicated service), diesel, ethanol and gasoline. The hose incorporates a THV barrier to resist permeation, multiple aramid plies of reinforcement for coupling retention, durability and kink resistance, and the cover is resistant to abrasion, oil and weathering. The hose is flexible for easy routing in and around small engines and small engine compartments. Series 389 surpasses all of the California Air Resource Board (CARB)/Small Off-Road Engine (SORE) and Environmental Protection Agency (EPA) strin­gent permeation requirements of 15g/m2/day. It also meets or exceeds SAE J30R7 and SAE J30R14T2 specifications, and is compatible with Parker SAE J2044 and J2045 Push-to-Connect fittings.

NOTES:
  • Do not use in marine fuel applications.


Design Factor:  5:1
Vacuum:  24
Industry Standards:  CARB 2006 SORE, EPA, SAE J30R7, SAE J30R14T2

Tube:

Black nitrile and translucent THV barrier

Reinforcement:

Multiple aramid plies

Cover:

Black CPE, smooth finish

Temperature:

-40°F to + 257 °F (-40°C to +125°C)

Packaging:

Coils, cartons

Branding:

PARKER SERIES 389 SUPER-FLEX® FL-7 (ID) SAE J30R7/R14T2 FUEL LINE (x)PKHPLINE389 EPA COMPLIANT 15 g/m2/day CARB Q-08-013 MAX WP 50 PSI USA (DATE CODE) NOTE: (x) changes every year

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black

Part No. ID ID Reinf
Plies
OD OD Approx Wt Min Bend Rad Max Rec WP Std Pack Request Quote
(in) (mm) (in) (mm) (lbs/ft) (in) (psi) Qty (ft)
38903 3/16 4.8 2 0.406 10.3 0.06 1.3 50 250 Request Quote
38904 1/4 6.4 2 0.500 12.7 0.09 1.5 50 250 Request Quote
38905 5/16 7.9 2 0.562 14.3 0.11 2.0 50 250 Request Quote
38906 3/8 9.8 2 0.625 15.8 0.12 2.5 50 250 Request Quote
38908 1/2 12.7 2 0.781 19.8 0.18 4.0 50 250 Request Quote
38910 5/8 15.9 2 0.938 23.9 0.24 5.0 35 250 Request Quote
38912 3/4 19.1 2 1.125 28.6 0.35 6.0 35 250 Request Quote

Warning!

  • Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov