Vendor: Manuli Rubber Industries

Category: Hydraulic Hose

---

Application:

EN 857 2SC

Medium-high pressure lines with installation constraints, return lines and suction lines

KEY PERFORMANCE:

• High flexibility and excellent bend radius
• Low weight
• Range extension to DN 76
• Vacuum resistance with SAE 100 R4 performance approved on sizes up to DN 76

For hydraulic lift applications according to EN 81-2 specification: DN 31: WP = 50 bar - DN 38: WP = 50 bar - DN 51: WP = 45 bar These ratings are identified with additional embossed branding on the hose references.

Tube:

Oil resistant synthetic rubber

Reinforcement:

2 high tensile steel braids (2WB)

Cover:

Environment resistant synthetic rubber

Temperature:

CONTINUOUS SERVICE: -40°F / +212°F -40°C / +100°C
MAX OPERATING TEMPERATURE: (Intermittent service) +250°F +121°C

Recommended Fluids:	Mineral oils, vegetable and rape seed oils, glycol and polyglycol based oils, synthetic ester based oils, oils in aqueous emulsion, water
Remark:	Halogen-Free hose line
Insert:	MF2000® - MULTIFIT TYPE
Applicable Specs.:	EN 857 2SC, ISO 11237 2SC, SAE 100 R16S
Type Approvals:	ABS, DNV, GL (DN 6÷51), GOST-R, LR BWB Approval upon request

PART. REF.	HOSE SIZE			R.O.D.		O.D.		MAX W.P.		BURST PRESSURE		MIN. BEND RADIUS		WEIGHT		FITTING	Request Quote
	DN	dash	inch	mm	inch	mm	inch	bar	psi	bar	psi	mm	inch	g/m	lb/ft
H01025006	6	-04	1/4	11,3	0,44	13,1	0,52	400	5800	1850	26830	45	1,77	280	0,19	MF+M03400-04	Request Quote
H01025008	8	-05	5/16	12,9	0,51	14,7	0,58	350	5070	1700	24650	55	2,17	330	0,22	MF+M03400-05	Request Quote
H01025010	10	-06	3/8	15,0	0,59	16,8	0,66	330	4780	1500	21750	65	2,56	395	0,27	MF+M03400-06	Request Quote
H01025012	12	-08	1/2	18,5	0,73	20,3	0,80	275	3980	1220	17690	80	3,15	510	0,34	MF+M03400-08	Request Quote
H01025016	16	-10	5/8	21,8	0,86	23,6	0,93	250	3620	1050	15220	90	3,54	630	0,42	MF+M03400-10	Request Quote
H01025019	19	-12	3/4	25,6	1,01	27,6	1,09	215	3110	920	13340	120	4,72	800	0,54	MF+M03400-12	Request Quote
H01025025	25	-16	1	33,0	1,30	35,2	1,39	165	2390	720	10440	160	6,30	1130	0,76	MF+M03400-16	Request Quote
H01025031	31	-20	1.1/4	41,1	1,62	43,6	1,72	125	1810	560	8120	250	9,84	1570	1,06	MF+M03400-20	Request Quote
H01025038	38	-24	1.1/2	47,7	1,88	50,7	2,00	100	1450	400	5800	300	11,81	1900	1,28	MF+M03400-24	Request Quote
H01025051	51	-32	2	60,4	2,38	63,4	2,50	90	1300	360	5220	400	15,75	2460	1,65	MF+M03400-32	Request Quote
H01025063	63	-40	2.1/2	73,0	2,87	76,0	2,99	70	1010	300	4350	760	29,92	2980	2,00	MF+M03400-40	Request Quote
H01025076	76	-48	3	87,8	3,46	90,5	3,56	45	650	180	2610	900	35,43	3250	2,18	MF+M03400-48	Request Quote

---