New Age - Vitube

Vitube

Vendor: New Age

Category: Tubing


Application:

Vitube-Flexible Tubing of Viton

  • Made of 100% pure Viton, a high performance synthetic rubber
  • Excellent temperature resistance: -40°F to 400°F continuously; 600°F periodically
  • Offers one of the widest ranges of fluid and chemical resistance of any commercial rubber
  • Excellent resistance to oils, fuels, lubricants, and most mineral acids
  • Also resistant to many aliphatic and aromatic hydrocarbons such as carbon tetrachloride, benzene, toluene, and xylene
  • Excellent resistance to environmental exposure such as sunlight and ozone
  • Available from stock in 60 and 75 Shore A durometers (Type B and Type A)


VITUBE’s main attributes include exceptional chemical resistance at elevated temperatures.
It has withstood continuous service temperatures of 600°F for 48 hours and 500°F for 1000 hours while maintaining its mechanical properties.
However, care should be taken at these elevated temperatures.
Tests should be performed to determine application suitability.
VITUBE possesses the high resiliency of an elastomer as well as the good mechanical properties of conventional synthetic rubbers.
The heat and chemical resistance factors, however, usually go far beyond the range of other rubbers.
The 60A durometer compound is specially formulated for use in peristaltic pumps.
All VITUBE formulations are produced with 100% DuPont Dow Viton fluoroelastomers (chemical name: fluorocarbon FKM) and are matte black in color.
VITUBE contains no regrind material nor blends of other elastomers.
If accidental burning of VITUBE occurs, extreme caution should be taken due to Hydrogen Fluoride and other decomposition products.
Avoid inhalation of vapors liberated at service temperatures above 392°F. If your application calls for harder VITUBE, 90A durometer is available.

Tube:

Viton

Temperature:

Brittle -40°F Maximum operating temperature 400°F

Category:

Viton

Part No. ID OD Wall Std. Length Lbs. Per Foot Request a Quote
60A Type A 75A Type B In. In. In. Ft.
2600185 2600192 1/32 3/32 1/32 50, 100 .50 Request Quote
2600360 2600367 1/32 5/32 1/16 50, 100 1.48 Request Quote
2600535 2600542 1/16 1/8 1/32 50, 100 .74 Request Quote
2600710 2600717 1/16 3/16 1/16 50, 100 1.99 Request Quote
2600885 2600892 1/16 1/4 3/32 50, 100 3.70 Request Quote
2601235 2601242 1/8 1/4 1/16 50, 100 2.97 Request Quote
2601410 2601417 1/8 5/16 3/32 50, 100 5.21 Request Quote
2601585 2601592 1/8 3/8 1/8 50, 100 7.91 Request Quote
2601935 2601942 3/16 5/16 1/16 50, 100 3.96 Request Quote
2602110 2602117 3/16 7/16 1/8 25, 50 9.90 Request Quote
2602810 2602817 1/4 3/8 1/16 25, 50 4.94 Request Quote
2602985 2602992 1/4 7/16 3/32 25, 50 8.18 Request Quote
2603160 2603167 1/4 1/2 1/8 25, 50 11.86 Request Quote
2603335 2603342 1/4 9/16 5/32 25, 50 16.10 Request Quote
2603685 2603692 5/16 7/16 1/16 25, 50 5.94 Request Quote
2603860 2603867 3/8 1/2 1/16 25, 50 6.92 Request Quote
2604035 2604042 3/8 9/16 3/32 25, 50 11.16 Request Quote
2604210 2604217 3/8 5/8 1/8 25 15.82 Request Quote
2604560 2604567 1/2 5/8 1/16 25 8.90 Request Quote
2604910 2604917 1/2 3/4 1/8 25 19.77 Request Quote
2605085 2605092 1/2 7/8 3/16 25 32.62 Request Quote
2605785 2605792 5/8 1 3/16 25 38.55 Request Quote
2605960 2605967 3/4 1 1/8 25 27.68 Request Quote
2606135 2606142 7/8 1 1/16 25 14.83 Request Quote
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov