Vendor: Dunlop

Category: Hydraulic Hose
Category: Special Application
Category: Water Hose    Sub Type: Water Blast Hose

---

Application:

Designed for very high pressure waterblasting.

• Surface Preparation
• Pavement Maintenance
• Paint Removal
• Corrosion and dust removal
• Welding residue, drawing compounds removal
• Abrasive Jet Cutting of Hard Materials
• Water Jet Cutting of food and soft materials
• WaterJets Texture Sandstone
• Hydrodemolition of Concrete
• Tank Cleaning

Tube:

NBR (Nitrile rubber)

Reinforcement:

Four Spiral Layers

Cover:

NBR (Nitrile rubber)

Temperature:

-40°F to +160°F

PRECAUTIONS:

• Restricted to use as high pressure waterjetting hose where safety factors of 2.5:1 are the industry norm. Due to the safety critical nature of these very high pressure hoses, it is recommended that pre-fitted and tested assemblies are sourced.

• No warranty is given for assemblies made with non-approved fittings.

• JGB recommends referencing the recommended practices for the use of manually operated high pressure waterjetting equipment published by the Waterjet Technology Association (WJTA).

Part #	Series	ID	OD	WP	Burst Pressure	Tensile Strength	Bend Radius	Weight	Request Quote
		in	in	psi	psi	lbs	in	lbs/ft
168-0082-10000D	WB10	1/2	0.969	10000	25000	2976	8.00	0.61	Request Quote
168-0082-12	WB10	3/4	1.27	10000	25000	4452	8.25	0.98	Request Quote
168-794-16	WB10	1	1.528	10000	25000	11034	14.00	1.46	Request Quote

---