ITR/Pirelli - SAE 100 R12

SAE 100 R12

Vendor: ITR/Pirelli

Category: Hydraulic Hose


Application:

Pulsating pressure hydraulic oil lines requiring additional flexibility and high temperature. All sizes have exceeded 1,000,000 impulse cycles when tested with ITR spiral couplings at 250°F and 133 percent of working pressure.

Tube:

Seamless black synthetic rubber. Oil resistant. Meets ro exceeds requirements of SAE 100 R12.

Reinforcement:

Four layers of nated, spiraled, high-tensile steel wire over a layer of fabric.

Cover:

Gray synthetic rubber. Resistant to abrasion, oil, fuel, and weathering. Meets Flame Resistance Acceptance Designation US MSHA.

Temperature:

-40°F to 200°F with peaks up to 250°F. -40°C to 120°C.

Category:

Pulsating Pressure Hose

Colors:

Gray

I.D. Size I.D. Tolerances O.D (in) Braid Diameter Pressures (psi) Min Bend Radius Weight (lbs) Per 100 Ft REQUEST QUOTE 
in mm + - Min Max Min Max Working Min Burst
3/8 9.5 6 0.375 0.023 0.008 0.74 0.83 0.63 0.70 4,000 16,000 5.0 48 Request a Quote
1/2 13.0 8 0.500 0.031 0.015 0.88 0.97 0.76 0.85 4,000 16,000 7.0 54 Request a Quote
3/4 19.0 12 0.750 0.031 0.015 1.18 1.24 1.06 1.12 4,000 16,000 9.5 103 Request a Quote
1 25.0 16 1.000 0.040 0.015 1.45 1.54 1.34 1.41 4,000 16,000 12.0 134 Request a Quote
1 1/4 32.0 20 1.250 0.047 0.015 1.79 1.91 1.68 1.78 3,000 12,000 16.5 181 Request a Quote
1 1/2 38.0 24 1.500 0.047 0.015 2.04 2.17 1.94 2.03 2,500 10,000 20.0 229 Request a Quote
2 51.0 32 2.000 0.047 0.015 2.56 2.69 2.46 2.55 2,500 10,000 25.0 280 Request a Quote
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov