Triplex Plunger Pump 5/8 inch Hollow Shaft

Description:

TC Series 60

Coupling Category

Pressure Cleaning Pumps

Manufacturer

General Pump

TC Series 60, Triplex Plunger Pump, Compact Design, 5/8” Hollow Shaft, Flanged for Direct Couple to Electric Motors (NEMA 56C) – New long life low-pressure seal, oversized bearings and sight glass. Forged brass manifold with an exclusive lifetime warranty.

Specifications

• Max. Inlet Pressure: 125 PSI
• Max. Fluid Temperature: 165° F
• Inlet Port Thread: 1/2" - 14 BSP-F
• Discharge Port Thread: 3/8" - 19 BSP-F
• Shaft Diameter: .625 in./16 mm Gauge Port: 1/8"
• Max. Inlet Vacuum: 3 ft. water (2.6 in. Hg)
• Pump Dimensions: 7.8" x 7.3" x 5.5"
• Crankcase Oil Capacity: 11.8 oz. Use GP Series 100 Oil
• Product Group: U

	GPM	PSI	RPM	BORE	STROKE	HP	SHP WGHT
TC1502E175	0.25 CPM	2500 PSI	1750 RPM	.591 in./15mm	.079 in/2.0 mm	0.5 EBHP	15.1 lbs.
TC1802E175	0.5 CPM	2200 PSI	1750 RPM	.709 in/18 mm	.079 in/2.0 mm	0.8 EBHP	15.1 lbs.
TC1508E175	1.75 CPM	2500 PSI	1750 RPM	.591 in/15 mm	.315 in/8.0 mm	3.0 EBHP	15.1 lbs.
TC1509E175	2.10 CPM	2500 PSI	1750 RPM	.591 in/15 mm	.370 in/9.4 mm	3.6 EBHP	15.1 lbs.
TC1809E175	3.10 CPM	2200 PSI	1750 RPM	.709 in/18 mm	.370 in/9.4 mm	4.7 EBHP	15.1 lbs.
Max. Inlet Vacuum: Flooded
TC1504E345	1.75 GPM	2700 PSI	3400 RPM	.591 in./15 mm	.158 in./4.0 mm	3.2 EBHP	15.1 lbs.
TC1505E345	2.1 GPM	2700 PSI	3400 RPM	.591 in./15 mm	.197 in./5.0 mm	3.88 EBHP	15.1 lbs.
TC1506E345	2.6 GPM	2700 PSI	3400 RPM	.591 in./15 mm	.256 in./6.5 mm	4.81 EBHP	15.1 lbs.
TC1507E345	3.0 GPM	2700 PSI	3400 RPM	.591 in./15 mm	.283 in./7.2 mm	5.55 EBHP	15.1 lbs.
No Flange for Direct Couple to Motor
TC1509E17N	2.1 GPM	2500 PSI	1750 RPM	.591 in./15 mm	.370 in./9.4 mm	3.6 EBHP	15.1 lbs.
TC1809E17N	3.1 GPM	2200 PSI	1750 RPM	.708 in./18 mm	.370 in./9.4 mm	4.7 EBHP	15.1 lbs.