Dixon Wilkerson Standard Regulators

Description:

with Gauge - without Gauge

Coupling Category

Air Fittings

Manufacturer

Dixon Air Fittings

Wilkerson Standard Regulator 3 Ports
  • 0-125 PSI adjusting range
  • non-rising push/pull locking adjustment knob
  • panel mount nut standard
  • excellent flow characteristics
  • can be installed with the adjusting knob in any position
  • To increase regulated pressure, pull adjusting knob up and turn clockwise. To reduce pressure, turn knob counter clockwise,
  • Two 1/4" NPT gauge ports standard on models without gauge, one 1/4" NPT gauge port standard on models with gauge can be used for additional outlet ports
  • models supplied without gauge use a GC230 gauge
  • maximum operating conditions: 300 PSIG (20.7 bar) and 32°F to 150°F (0°C to 65.5°C)

Size SCFM With Gauge
Part #
Without Gauge
Part #
1/4" 112 R26-02RG R26-02R
3/8" 148 R26-03RG R26-03R
1/2" 185 R26-04RG R26-04R


Wilkerson Standard Regulator 2 Ports
  • 0-125 PSI adjusting range
  • self-relieving standard
  • four adjusting pressure ranges available
  • To increase regulated pressure, pull adjusting knob up and turn clockwise. To reduce pressure, turn knob counter clockwise.
  • Two 1/4" NPT gauge ports located on the front and rear faces of the body. These ports may be used as additional regulated ports or for pressure gauges.
  • models supplied without gauge use a GC230 gauge
  • maximum operating conditions: 300 PSIG (20.7 bar) and 32°F to 150°F (0°C to 65.5°C)

Size SCFM With Gauge
Part #
Without Gauge
Part #
3/8" 162 R28-03RG R28-03R
1/2" 170 R28-04RG R28-04R
3/4" 179 R28-06RG R28-06R


Safety Alert - Hose, Couplings, and Hose Assemblies FRL’s are designed for air service only, unless otherwise indicated.

SCFM ratings at 100 PSIG inlet pressure.

Dixon Wilkerson Standard Regulators
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov