Dixon Flomax High Flow Series

Description:

Nozzles and Receivers

Coupling Category

Dry Disconnect Fittings

Manufacturer

Dixon Dry Disconnects Fittings

3/4" Series


Consists of 6 nozzle and receiver sets that are color coded for quick identification of mating parts. Each color nozzle and receiver will only couple with their matching color component. This provides complete protection against cross contamination.


  • maximum flow rate of 45 GPM at 70 PSI
  • working pressure rating: 200 PSI
  • The standard mounting for the nozzle is a 3/4" female NPT
    and for the receiver is a 3/4" male NPT.

Nozzles

Female NPT
size
Description Anodized Aluminum
Part #
3/4" red nozzle with plug ENBL-P
gold nozzle with plug ENBL-P2
teal nozzle with plug ENBL-P3
violet nozzle with plug ENBL-P4
navy nozzle with plug ENBL-P5
copper nozzle with plug ENBL-P6



Receivers

Male NPT
size
Description Anodized Aluminum
Part #
3/4" red receiver with cap ERS-C
gold receiver with cap ERS-C2
teal receiver with cap ERS-C3
violet receiver with cap ERS-C4
navy receiver with cap ERS-C5
copper receiver with cap ERS-C6

Note: ERS series is available with JIC bulkhead base. Substitute ‘J’ for ‘S’. Example: ERJ-C2




1" Series


Consists of 7 nozzle and receiver sets that are color coded for quick identification of mating parts. Each color nozzle and receiver will only couple with their matching color component. This will provide complete protection against cross contamination.


Each of the 7 nozzles and 7 receivers has the following performance:

Physical Description:
  • The nozzle/receiver combination has a flow area equivalent to a 1" schedule 80 pipe.
  • The fittings have a 500 PSI working pressure rating with 1500 PSI minimum burst pressure.
  • All wear parts are constructed of stainless steel for long life and corrosion resistance.
  • All non-wear parts are constructed of colored anodized aircraft grade aluminum for high strength, lightweight and corrosion resistance.
  • The standard mounting for the nozzle is a 1" female NPT and for the receiver is a 1" male NPT. The receivers also come with a 1" female NPT threaded base.
  • The nozzle incorporates a "ball lock" mechanism to ensure smooth and reliable operation.
  • nozzle length: 3.90" (99 mm)
  • receiver length: 3.44" (87 mm)
  • diameter: 2.50" (64 mm)
  • hex size: 2" (51 mm)
  • nozzle and receiver coupled length: 5.44" (138 mm)

Nozzles

Female NPT
size
Description Anodized Aluminum 
Part #
1" red nozzle with plug HFN-P1
gold nozzle with plug HFN-P2
teal nozzle with plug HFN-P3
violet nozzle with plug HFN-P4
navy nozzle with plug HFN-P5
copper nozzle with plug HFN-P6
blue/gray nozzle with plug HFN-P7


Receivers

Male NPT
size
Description Anodized Aluminum 
Part #
1" red receiver with cap HFR-C1
gold receiver with cap HFR-C2
teal receiver with cap HFR-C3
violet receiver with cap HFR-C4
navy receiver with cap HFR-C5
copper receiver with cap HFR-C6
blue/gray receiver with cap HFR-C7
Dixon Flomax High Flow Series
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov