Dixon Notched Cam and Groove Coupler with Notched NOS Shank

Description:

Female Coupler x Notched NOS Hose Shank - Stainless Steel

Coupling Category

Cam and Groove

Manufacturer

Dixon Cam and Groove Fittings

•  The largest advantage of the notched design is that the coupling can be removed from a damaged hose by cutting away the ferrule, without necessarily damaging the fitting. After inspection of the fitting to determine its suitability for reuse, it can be reinstalled into another hose by using a new ferrule. 
•  The notched system allows you to better manage your inventories. You can stock one stem and two ferrules, and cover the same hose range with less inventory.
You must purchase a fitting and the matching ferrule to create an assembly. 
•  For hose outside diameters of 2-4/64" and below, the couplings are crimp only.
•  For hose outside diameters of 2-5/64" and above, the couplings can be crimped or swaged.
•  for use with notched ferrules

Only use the NOS shank with the NOS ferrules. Due to differences in dimensions and tolerances for safety reasons, do not use other manufacturer’s stems or ferrules with Dixon products.

Dixon type C with NOS shank

Size inches	316 Stainless Steel
	Part #
1-1/2	150CNOSSS1
2	200CNOSSS
3	300CNOSSS

¹ part will be discontinued as stock is depleted


Contact JGB for swage and crimp recommendations.