Dixon Double Bolt Clamps
Description:
with Saddles - without saddles
Coupling Category
Clamps
Manufacturer
Dixon Clamps
A rugged, plated iron two-bolt clamp with machine bolts and hex nuts.- inner surface has dual gripping ridges
- bolt lugs are reinforced to prevent bending out of alignment
- measure hose OD accurately before ordering clamps
- Consult JGB when using double bolt clamps on helical wire hose.
- Torque values for clamps are based on dry bolts.
The use of lubricant on bolts will adversely effect clamp performance.
with saddles
| Hose OD | Plated Iron | Opt Qty | Torque | |
| from | to | Part # | in ft. lbs. | |
| 3-32/64" | 3-52/64" | 400 | 25 | 40 |
| 3-50/64" | 4-4/64" | 431 | 20 | 40 |
| 4-2/64" | 4-18/64" | 463 | 20 | 40 |
| 4-16/64" | 4-60/64" | 525 | 10 | 60 |
| 4-32/64" | 5-16/64" | 550 | 10 | 60 |
| 5-8/64" | 5-44/64" | 600 | 10 | 60 |
| 5-44/64" | 5-60/64" | 639 | 10 | 60 |
| 5-60/64" | 6-32/64" | 675 | 10 | 60 |
| 6-32/64" | 7-36/64" | 769 | 10 | 60 |
| 7-44/64" | 8-12/64" | 818 | 5 | 125 |
| 8-16/64" | 8-56/64" | 875 | 5 | 125 |
| 8-60/64" | 9-56/64" | 988 | 5 | 125 |
| 9-60/64" | 11-24/64" | 1125 | 5 | 125 |
| 11-12/64" | 13" | 1275 | 3 | 125 |
| 12-12/64" | 14" | 1360 | 2 | 200 |
| 13-12/64" | 15" | 1450 | 2 | 200 |
| 15-4/64" | 17-32/64" | 1700 | 2 | 260 |
without saddles
| Hose OD | Plated Iron | Opt Qty | Torque | |
| from | to | Part # | in ft. lbs. | |
| 1-8/64" | 1-12/64" | J48 | 100 | 15 |
| 1-12/64" | 1-24/64" | J49 | 50 | 21 |
| 1-28/64" | 1-34/64" | JX49 | 25 | 21 |
| 1-40/64" | 1-52/64" | DL14 | 25 | 40 |
| 1-48/64" | 2-3/64" | DL20 | 25 | 27 |
| 2-7/64" | 2-19/64" | DL241 | 25 | 27 |
| 2-20/64" | 2-40/64" | DL321 | 25 | 40 |
| 2-32/64" | 2-48/64" | DL275 | 25 | 40 |
| 2-48/64" | 3-4/64" | DL306 | 20 | 60 |
| 3-4/64" | 3-24/64" | DL328 | 20 | 60 |
| 3-16/64" | 3-32/64" | DL350 | 20 | 60 |
1 investment cast carbon steel
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |