Dixon Stepless® Ear Clamps

Description:

304 Stainless Steel

Coupling Category

Clamps

Manufacturer

Dixon Clamps

Technical Information: Stepless® ear clamps hold against pressure and vibration or material shrinkage due to temperature changes or aging. A built-in spring action permits the clamp to breathe without loosening. When installing Stepless® ear type clamps over an object, please note that each ear must be crimped closed to obtain a proper seal.

  • once installed and clamped, any tampering is easily visible
  • When ordering Stepless® ear clamps, select the nominal size nearest to, but always larger than, the outside diameter of the material to be clamped. The outside diameter should be determined with connection fully assembled.
  • sold in quantities of 100 per bag
  • Clamps are not reusable; they should not be pried open, doing so renders the clamps nonfunctional. Safety Alert - Hose, Couplings, and Hose Assemblies

Features:
  • 304 stainless steel
  • ensured clamping seal
  • for low durometer and/or thin-walled hose/tubing
  • for silicon, vinyl, polyurethane or other high-tech materials
  • Smooth inner band prevents damage to the hose while the tongue-in-groove design provides a 360° seal.
  • no steps or gaps inside the clamp
  • Install clamps using 1098 or 1099 clamp tools below.


Nominal Range (inches) 304 Stainless Steel
Size closed  open  Part #
9/32" .228 .275 0983
3/8" .307 .374 0986
7/16" .378 .445 0989
1/2" .425 .524 0993
35/64" .453 .551 0997
9/16" .472 .571 0999
5/8" .520 .618 1005
11/16" .571 .669 1009
3/4" .654 .779 1021
13/16" .701 .827 1029
Dixon Stepless® Ear Clamps
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov